|
|
07-15-2013
Ok lately I have been experiencing a sort of grinding noise when driving slowly. When I removed my wheels and turned the wheels as if they were in motion both fronts moved kinda hard. It's like something was holding the wheels and it was kinda difficult to turn the wheels. Also while investigating I saw that my drivers side axle boot was torn and had no grease In it smh. Could this be the issue? Thanks guy's
Sent from my HTC One using Tapatalk 2
07-15-2013
Sure it could be..
Your things are gonna be tough to turn in teh air.. cause the trans is in park..
07-15-2013
Good point. Let the search begin. I'm thinking maybe a bad hub.
Sent from my HTC One using Tapatalk 2
07-15-2013
A hub will exhibit noises at speed usually. Can go away when you turn one way or the other. Brakes will often be when you aren't pushing on them.... CV usually clicks and doesn't grind.
07-15-2013
Rotors are shot. So I'm thinking the brakes are catching the rotors while driving.
Sent from my HTC One using Tapatalk 2
07-15-2013
How bad are the rotors? You could always spend $10 each at Oreileys and have them cut.
07-15-2013
Like bad, I changed the back but money has been tight so haven't got around to the front. I'll grab a pic in a few
Sent from my HTC One using Tapatalk 2
07-15-2013
Crappy rotors
Sent from my HTC One using Tapatalk 2
07-15-2013
And how much pad is left?
07-15-2013
Pic incoming...
Sent from my HTC One using Tapatalk 2
07-15-2013
Can't just answer the question huh?
07-15-2013
I'm thinking less than 20 percent left on these
Sent from my HTC One using Tapatalk 2
07-15-2013
Are the inner and outer pads pretty equal, if so..you pad slapped that bish hard at least once.
07-15-2013
More on the outer than the inner, that I can see lol
Sent from my HTC One using Tapatalk 2
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
