Just as the title states, I installed the bar today and it was the first time I have put one in. It was not that bad of a job and took me about an hour. I didnt have to drop the tierod(s) or the craddle. I slid it out the passenger side and put the new one in the through the drivers side. I lubed the bar upand then hit it lightly with a hammer where it was rubbing the frame. It slid right through with no prob....again without disconnecting nothing. I bought the Doorman bar. It was THREE times heavier and def made waaay better than the junk OEM one. Doorman was thicker too. I noticed that some people stated that they installed it upside down by accident. On the Doorman bar I bought, it was stamped in white paint "Bottom and drivers side", indicating where and how it should be placed. It was self explainatory. Easy job, with marked improvement. Next I will be doing the lower control arms. RA has them for less than $40.00 smacks a piece. Way cheaper than Advance, which btw is where I bought the bar today. It was $99.00 bucks, but I entered the TRT30 code and got 30% off!!
