|
Nope way to damn much for a gen 3 SC. Those go for around $100-150 if that.
Sent from my iPhone using Tapatalk
I have one sitting in my garage with a throttle body still on it....
Well like the one in eBay , no the H bar isn't removed. And it isn't removed on my gen5 either (which is intercooled)
is it beat on ? Is the one in eBay beat on? I bet it just has a new coupler.
Well the one in my garage never saw any pulley smaller then stock so I can honestly say it's not been "beat on"
Oh and u can run a gen 3 IC on a gen V SC. Difference is IC core isn't as big as if it was a gen V core.
Sent from my iPhone using Tapatalk
Yup bolt holes line up
Most guys will either run a port n polish gen 3 or just go with a gen V
They're both pretty damn similar at the point but gen V can be had for pretty cheap and comes with the better coating on the rotor pack
Sent from my iPhone using Tapatalk
I found this several years ago and like to share it when people are talking about the differences between the gen3/gen5
http://www.regalgs.org/topic/54470-g...l=supercharger
Best part is , my pics are all in that thread as well so I don't have to copy them here![]()
Is it worth it to try to rebuild a gen 3? new bearings and what not. I know i would need a press for the bearing but is it more of a pain in the ass then its worth?
« Previous Thread | Next Thread » |