|
|
12-28-2012
My friend has an 06 supercharged GT and the passenger heated seat back light and the adjuster buttons for the passenger side climate control have burnt out. I was wondering if there was a way to get in there and solder in new bulbs? I did this before in my Bonneville so I'm wondering if it's the same in the Prix.
Thanks guyz
12-28-2012
Well there is only one way to find out.
Its super mega easy to pull the climate controls. Just remove the bezel an then 2 screws.
Sent from my Samsung Galaxy S3
12-28-2012
Yes you can, the hardest part is opening up the climate control assembly, simply because the miniature hex bolts are a *****. In spite of having tons of tools, I didn't have a hex socket that small, I don't even know what the measurement is. I struggled using some needle-nose pliers.
Someone suggested on another thread to replace all the bulbs with LED's, as the "stock" ones commonly burn out for no apparent reason. I may do that myself, I have one burnt out, so I'm the only one that notices it. But I've got horrible OCD with things like that D:
12-28-2012
Hmm I have a burnt out bulb in my climate control also, 2000 GP.
12-29-2012
Thanks guys. I was wondering, if there's any size of LED or bulb I should be looking for? You think they'd be the same as my Bonneville's? I know you said it was easy to get into the CC, but are there any instructions or pictures? I don't wanna mess anything up.
12-29-2012
They are little tiny leds, I took mine apart as two bulbs were out, I believe it's eithe 1/4 or 3/16 size hex heads, but there is no just replacing them, you have to solder them back on. Needless to say I left them out for now lol
12-30-2012
Soldering is not a problem. Thanks HVAC.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
