vaccum hose?

**kingd44** · 10-13-2008

can some one please click on those links and tell me if in fact i m missing a vaccum hose where that hole is in the middle of that clamp and if it is could u tell me where it leads to because i believe i m missing one and that maybe the reason my car is running like shiot....the 2nd link is a close up

http://i270.photobucket.com/albums/j...Picture018.jpg

http://i270.photobucket.com/albums/j...Picture017.jpg

TDCRacing · 10-13-2008

Try this one buddy http://i270.photobucket.com/albums/j...Picture018.jpg

TDCRacing · 10-13-2008

The hose to the right of the blow by valve is a vacume hose.
There is NOT suppose to be a hose on that nipple by the other vacume hose.
The hose comming off of the blow by valve (black round thing) is a vacume hose

**kingd44** · 10-13-2008

so what would that nipple be there for because it looks like it is in a clamp for something to go over it and clamp it together...the reason i say this is cause i found 2 other vacuum hoses detached and my car was not running right so when i was checking for nething else i found that???

TDCRacing · 10-13-2008

To be honest im not sure. I'm sure it is setup for another model car. Those BBV's fit regal's to gp's.

The only vacume hoses on our cars go to the lower intake manifold (pass side) fuel pressure regulator, brake booster, evap purge valve ( they have clamp type fittings) and Blow by valve and also the throttle body

**BADAZGTP** · 10-13-2008

I was wondering the same thing about that nipple. I know it has like a piece of foam that is suppose to be on it and that is what that clamp is for. My foam just feel all apart and looks like what happened to yours. Deffinatly no vacuum on it.