Headers installing problem...

Those are the OBX headers, they need the cross over modified to fit over the trans, and the trans has to have a chunk taken out of the casing for the cross over to bolt to the front header. Also you need to weld the y-pipe or it will leak. I had those headers, big problems from them from day one. I now have Speed Daddy's and never would go back.

I contacted the guy and he said it would direct bolt up to stock exhaust with no modifications

Of course he would... It's a business, they sell sell sell

no modifications to what would be left of the stock exhaust. i'm pretty sure i have the same ones, or at least a different knock off. had to take a chunk out of the trans case, and the downpipe needs cut, and the collector will need sealed hardcore. looking back now, i woulda bought diferent ones

Gonna do mine soon, gonna at least give it a shot prior to taking it in. Keep the posts comin so I dont have to make a new thread!!!!

Quote:

---

Originally Posted by szalajka05

Well I bought then already. Doesn't matter the brand, they are stainless steel, direct fit, and have huge primaries with a 3" down pipe. Just need to know if headers I general ate hard to install outer if its worth 300-500 to get installed

---

Well there are a few things you could do. 1) call the seller and see if you can get a refund. 2) pay over $200 to get them installed. 3) take the hit, buy speed daddy's, and try to sell those. 4) find someone that can do the modifications to help you out. I would first see if you could send them back. I have never tinkered with these headers, but i've heard bad things. A little research goes a long way. Speed daddy's are about as direct fit you can get for $200. spend maybe another ~$40 on clamps and you have shiny new headers.

Send me a link for these speed daddys

Frozenboost.com has the clamps for $5 each.

i agree with tu8i107. i got the sme ones you did. sell them.... i was going to get a shop to do it he priced it at 400.00 even. i ended up doing it myself and ran into alot of problems.nothing lined up had to do alot of cutting and rewelding. this will save you a headache.

So where are these headers I'm suppose to get?

Wth they seem to be out of stock, and dna motoring doesnt list them either :confused:

Just get these same thing http://www.ssautochrome.com/level.itml/icOid/1886

These will fit my 07 s/c prix??

Yeah they will bolt up and with the right clamps seal up just fine.

I is pushing BIN

So yeah that site with the headers seems to be down now...

There are some for sale in the for sale section on here. $200 shipped