Thread: i hope somebody can help me

Results 1 to 13 of 13
  1. #1 i hope somebody can help me 
    SE Level Member
    Join Date
    Mar 2012
    Location
    PA
    Posts
    7
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I have had a 97 gtp for about 4 years almost 91,000 miles on it, have done a tune up, put a new supercharger, cps, and icm on it and it was running fine, i gutted the cat, replaced the resignater with a glass pack and removed the mufflers. Now while im driveing it feels like it cuts out nd right back in but its not all the time, we have a motis at our shop and that told me the 2 codes were for the mass air flow sensor and the left bank running lean, a guy i work with told me he thinks there is a chance the fuel pump is going bad so we put the pressure tester on and it stayed at about 40 when it was running good when it was running bad it stayed right between 38 and 40psi i dont really have the money right now to just put a mass air flow sensor on and have it not fix the problem i was hoping somebody might have some ideas any help would be greatly appreciated im not much of a mechanic but i should be able to answer any questions you need me to

    Thanks
    Red
    Reply With Quote  
     

  2. #2 Re: i hope somebody can help me 
    GXP Level Member ctracer's Avatar
    Join Date
    Sep 2010
    Location
    new britain, ct
    Posts
    2,295
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    instead of replacing the MAF i would suggest buying some MAF cleaner and cleaning it.
    07 Black GXP.
    Reply With Quote  
     

  3. #3 Re: i hope somebody can help me 
    SE Level Member
    Join Date
    Mar 2012
    Location
    PA
    Posts
    7
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    if it would be easier for you you can text me at 570-837-nine zero nine one, i dont have very good cell service in the shop so it might take a couple min to reply

    Red
    Last edited by g9t7p; 03-04-2012 at 01:40 PM.
    Reply With Quote  
     

  4. #4 Re: i hope somebody can help me 
    SE Level Member
    Join Date
    Mar 2012
    Location
    PA
    Posts
    7
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    ok i can try that after work, thats why i came here im strictly a body man never even heard of Maf cleaner
    Reply With Quote  
     

  5. #5  
    Awaiting Confirmation
    Join Date
    Jul 2009
    Location
    aowdnawi
    Posts
    23,292
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    Vac leak?
    Reply With Quote  
     

  6. #6 Re: i hope somebody can help me 
    Sunroof S/C'es air 2 face E IN v Y's Avatar
    Join Date
    Jun 2011
    Location
    I’m a space bound rocketship and your hearts the moon.
    Posts
    2,103
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I would edit you phone #, like with words.
    ex: 715-123-four five six seven
    Reply With Quote  
     

  7. #7 Re: i hope somebody can help me 
    SE Level Member
    Join Date
    Mar 2012
    Location
    PA
    Posts
    7
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    i checked all the vac lines they all seem to be good and are all going where they are supposed to
    Reply With Quote  
     

  8. #8  
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,484
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    IIRC your code about being lean is a common code if you have a vac leak caused by a leaking LIM. Try spraying carb cleaner around the LIM and see if you get a spike in rpm's
    97 GTP Sold-prolly rusted away by now
    2011 F-150 Yote powered
    Too Hot to Handle, Too Cold to Hold
    Reply With Quote  
     

  9. #9 Re: i hope somebody can help me 
    SE Level Member
    Join Date
    Mar 2012
    Location
    PA
    Posts
    7
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Iceman6669 View Post
    IIRC your code about being lean is a common code if you have a vac leak caused by a leaking LIM. Try spraying carb cleaner around the LIM and see if you get a spike in rpm's
    When i spraid Right under the MAF I did get a spike in the rpm
    Reply With Quote  
     

  10. #10 Re: i hope somebody can help me 
    SE Level Member
    Join Date
    Mar 2012
    Location
    PA
    Posts
    7
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Also when i checked the codes today they were, Left bank running lean, MAF low signal, MAP low signal intermitent
    Reply With Quote  
     

  11. #11  
    The Boss Iceman6669's Avatar
    Join Date
    Jun 2011
    Posts
    7,484
    Thanks (Received)
    8
    Likes (Received)
    38
    Dislikes (Received)
    0
    Quote Originally Posted by g9t7p View Post
    When i spraid Right under the MAF I did get a spike in the rpm
    Have you ever replaced your LIM gaskets??? If you are getting a spike in RPM's then you have a leak somewhere near there.
    97 GTP Sold-prolly rusted away by now
    2011 F-150 Yote powered
    Too Hot to Handle, Too Cold to Hold
    Reply With Quote  
     

  12. #12 Re: i hope somebody can help me 
    SE Level Member
    Join Date
    Mar 2012
    Location
    PA
    Posts
    7
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Iceman6669 View Post
    Have you ever replaced your LIM gaskets??? If you are getting a spike in RPM's then you have a leak somewhere near there.

    I havent, iu am going to this weekend and hope for the best, thanks for the help, i wasnt even thinking of that haha
    Reply With Quote  
     

  13. #13 Re: i hope somebody can help me 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,833
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    FWIW there is no left bank. You only have one O2 sensor that is in the combined exhaust stream. Bank 1 on our cars is the one exhaust pipe. Bank 2 is typically in a V8 where you'd have seperate exhaust and a second O2.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

Similar Threads

  1. hope this isn't a repost..
    By Myprixxx in forum Off Topic Discussion
    Replies: 2
    Last Post: 03-08-2010, 09:38 PM
  2. I sure hope I'm in the right section for this
    By sarahleigh112 in forum Brakes/Suspension/Chassis
    Replies: 10
    Last Post: 12-17-2009, 02:21 AM
  3. hello to the forum, I hope you can help me!
    By 787heavy in forum Introductions/Noob Questions
    Replies: 4
    Last Post: 04-27-2009, 03:34 PM
  4. :( no hope
    By LogicGTP in forum Track Sessions and Kills
    Replies: 49
    Last Post: 02-18-2009, 04:52 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •