|
|
11-14-2011
they were gapped HUGE! I previously gapped all my plugs .055 2 weeks ago then had a misfire the other night "talked about in a previous forum" checked them out and all front plugs were gapped way over .055 these are autolite plugs $1.99... Is this known to happen? Foul plugs? Never knew it could do that after 2 weeks! Lol
11-14-2011
Junk plugs is what they are.
11-14-2011
but people here talk about the 3800's lovin' those plugs.
11-14-2011
^^Because they do.
New plugs...and you gapped them when you put them in correctly...you just didn't look and toss them in?
AL606's, 605's, 104's?
11-14-2011
not to say we told you so, but you did buy a modded car that you dont know jack about.
I bet its hurting more than you know.
Like your tap shift stuff, I bet that was screwd up with the so called tune it has or with some shotty wiring or whatever.
And now with these plugs, it "could" be bad plugs, but the likelyhood of you getting 3 bad front plugs is far fetched.
Its gotta be more than just a plug issue your dealing with.
11-14-2011
Define: way over
11-14-2011
Way over = missing electrode tip? Yay.
3.4" on a GenV...with just headers...sounds knock free to me...rite??
11-14-2011
I can't remember how far over... I know my car is screwed w/ the Pulley and crap.. Im not boostin' around in it im waiting for it to sell to this kid who has the money to put into it or ill drive it like a granny and wait til I have money saved up.
11-14-2011
3.4 pulley on GenV and only headers is AL103 territory.
11-14-2011
Remove 3.4"
Replace w/ 3.8"
Put in new plugs.
OR.
Buy short block and get a proper tune with a 3.6".
11-14-2011
AL103? Its said to have been tuned. whether it has or not I truely do not know, im a dumb kid who bought a cool lookin' ride I guess. My mistake. Wish one of you guys lived around here to look under my hood and tell me whats all been done to it
11-14-2011
I'll look at it in August, 2012 when I go to Ohio.
How's that?
11-14-2011
Put a 3.8 pulley on it dude.
11-14-2011
yo blue. it might be dead by then lol! Nix, I know man im in a tough spot $$ right now. Wish someone on here would TRADE PULLEYS!
11-14-2011
You need a stock pulley? I probably have several laying around. You'll just have to have the 3.4 taken off and the 3.8 pressed on. That way you can just get some AL 606's or stock ac's
11-14-2011
**** AL606. He's GenV. He needs AL605 even on stock pulley
11-14-2011
You want the hottest spark you can get away with...not the coldest...colder plugs might be better for "combating knock" but then you run into the issues of constant fouling/premature plug life, hard starts, misfires at idle or high RPM's, busted knuckles...blood loss, etc.Originally Posted by Nixon
11-14-2011
Moar boost, colder plug brotato.
11-14-2011
I understand the hottest plug ideal. Sometimes it just dont work that way though.
11-16-2011
Like my car?
Fouling TR6's in 3000 miles.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
