and send me measurements for a pcm tray and possibly a pic
plan on making one
|
|
08-09-2011
and send me measurements for a pcm tray and possibly a pic
plan on making one
08-09-2011
Get one from a blazer. Also fixed your title.
Last edited by TheOtherNick; 08-09-2011 at 12:29 PM.
08-09-2011
For my first pcm tray I used zip ties...
Originally Posted by W-Body Store
08-09-2011
I used some self tappers.
08-09-2011
s10 blazer 98 - 00 (there are 3 diff pcm's)
self tapping screws
Originally Posted by TLSheff
08-09-2011
I also used one from an S10. The pcm tray should be the same. I used one from a 99'.
08-09-2011
Or just move it to the bumper like I did and then it's completly hidden.
08-09-2011
^^^ pics??
Originally Posted by TLSheff
08-09-2011
That's also with a 97 PCM so anything newer will be easier.
08-09-2011
thats a good idea. dont plan on doing any more with this car because i plan on selling it in a few months and getting a newer one or a different car all together
but thanks alot anyway
08-09-2011
Thanks. We turbo guys run into the issue of the turbo being mounted pretty much on top of the PCM. Which sucks due to the amount of heat the turbo generates.
08-09-2011
i use gravity for my pcm tray
08-09-2011
just read my original question and it souds a little demanding.
original title was "can someone please be kind and...."
idk if a moderator changed the title or what
prob no bid deal but didnt want to sould like an a hole
08-09-2011
they like for us all to have direct and subjective titles. for one, it makes searching more accurate so if someone searches this thread they can find it easier.
08-10-2011
I used the bottom of the OE air box where it was from the factory.
Just used a wizzy wheel and chopped the box down.
I can snap a picture later if you need.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
