ordered tog headers from 3800performance with the cat kit and this is what i got...i dont mind getting raped for good parts but i expect that they be finished, functional, and that they not need modified..well i guess $1300 wasnt enouph
|
|
05-01-2011
ordered tog headers from 3800performance with the cat kit and this is what i got...i dont mind getting raped for good parts but i expect that they be finished, functional, and that they not need modified..well i guess $1300 wasnt enouph
05-01-2011
send it back and demand free ****
05-01-2011
my crossover didnt even come close to fitting in place so after messing with it for over an hour and a half took the headers off and saw the last pic in the above post..this is keeping the header from seating on the rear head correctly which is causing the crossover fitment issues
05-01-2011
Why would u even try to install those? Send them back
05-01-2011
i honestly didnt see it..its my fault as i figured with the amount i spent and the way 3800performance insisted on the quality of the parts that i just didnt need to check..at least ive learned a lesson..Originally Posted by boostedcompg
05-01-2011
Wow I would not expect that from TOGs, especially with how much people rant and rave about how good they are.
Originally Posted by The Sunfire Guy
05-01-2011
terrible. i'd be upset.
05-01-2011
im furious! if these damn things damaged my head, which i doubt they did, ill shove the rear manifold up someones ass
05-01-2011
id love to stay with togs as these are gorgeous headers but im demanding a set that has been test fit on a functional motor first with 0 complications and im demanding a partial refund of the raped price i paid for my hassle
05-01-2011
Mine fit just fine. I paid $290 for them though so maybe that's why. lol
05-01-2011
As you should. Include pictures
05-01-2011
kinda hard to get a good pic of the rear header when shes in the car but this entire thread is being sent to 3800performance so they will hopefully see that sloppy workmanship will cause angry customers which in turn will cause a drop in sales
05-01-2011
I understand your mad. As I would be. But give them a chance to fix it before you jump there **** too much. Now if they start jerkin ya around on it then game on
05-01-2011
no! plain and simple if you charge an enormious rate for a part and guarantee quality and your part had MULTIPLE flaws then your **** should be drug out in public for the world to see. i refuse to believe they somehow missed everyone of these flaws. you could over look one or two maybe but never all three of these very obvious flaws and they shipped the parts out anyways. it would be different had they been built in china as id expect that but this is unacceptable and a joke!
05-01-2011
Well if 3800 performance made these I would agree with you. I have done business with 3800 perf on several occasions and believe me when I say he will be as shocked as you where to see the flaws because they are rare, we know you are upset but give em a chance to make it right.
05-01-2011
shouldhave went with the WBS headers if you wanted something different than SD's
05-01-2011
100 percent agreed is no acceptable. What I'm sayin is goin at it with a cool head will most likely get you farther. Not sayin don't be mad...I'm mad for you. Just when dealin with them give them a chance to say holy **** we ****ed up let us fix this before you tear into them. Now if that's not the first words out of there mouth then like I siad, light em up
05-01-2011
that small flange imperfection can not only be fixed with a little bit of your time and effort, but it shouldnt make much difference since the seal is a donut gasket, not the flange.
05-01-2011
okay so a quick question for you then bio..if you paid 1300 dollars, and yes before you say it i know you wouldnt, dut say you did, would you want to be fixing their mistakes...??? if you say yes then you need to lay off the drugs and booze buddy
05-01-2011
| « Previous Thread | Next Thread » |
