I have a 01 Grand Prix GT-3.8 and wanna know where the IAC sensor and TB screen are located..so i can clean or replace???? Im fairly new to this & dont have to much mechanical knowledge..Help!!! (Picz would be very helpful)
|
|
03-23-2011
I have a 01 Grand Prix GT-3.8 and wanna know where the IAC sensor and TB screen are located..so i can clean or replace???? Im fairly new to this & dont have to much mechanical knowledge..Help!!! (Picz would be very helpful)
03-23-2011
TB screen is in the TB, IAC sensor is a little plug thing that is a twist and pull to remove and its on your intake
Originally Posted by Bio248
03-23-2011
Thanx for the insight!! Does anybody have picz of the IAC sensor on the intake?? Cause i see 3 sensor's in that area
03-27-2011
Theres only one sensor on the intake tubing.
the rest are on the TB.
03-27-2011
He seems to be asking where the IAC (Idle Air Control) valve is at, not the IAT (Intake Air Temp.).
The IAC is one of those 3 sensors on your TB. It looks like this and is held on with 2 bolts...
I wouldn't replace the TB screen, but just clean the entire TB w/ the appropriate cleaner (not carb or brake cleaner) and call it done. The butterfly in the TB gets gummed up after years and sticks sometimes. Also clean the passages for the IAC, etc... Get a new TB to UIM gasket as well or you will have leaks.
03-27-2011
IAC isnt in the intake. Its the sensor on the TB that looks like the above picture
http://www.streetfire.net/video/2001...ynp_208097.htm
03-27-2011
Good lookign out FordMan!! the picz were definitely helpful.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
