Illuminating Switches

[Reddcurrlz]

I have a 2000 GPGT and I'm fixing things little by little to make it nicer and the switches for the windows and locks on the driver side, do not illuminate.

Are there fuses inside the the control panel or light bulbs? or are there fuses someplace else or light bulbs.

Please let me know

Thanks ya'll

[BillBoost37]

There's usually a couple of lights in there. Odd that you don't get any lllumination to that. I'd pull the switch and check the wire in taht connector for power with the lights on. Don't have the schematic in front of me, but someone can probably toss the info at you.

[Reddcurrlz]

There's usually a couple of lights in there. Odd that you don't get any lllumination to that. I'd pull the switch and check the wire in taht connector for power with the lights on. Don't have the schematic in front of me, but someone can probably toss the info at you.

That would be extremely helpful, as I have read the manual from front to back and cannot find any information about that particular part. Gonna call the dealer and see if they have any suggestions.

That door panel has been taken off and put back on so many times due to those durn window issues, so it's possible something got knocked loose or broken.

If anybody has a schematic, I would be extremely grateful.

TY all