i was going to do an engine swap from a 3100 to a 3800 L32, and i needed to know what transmission runs with the L32, and what mods are out there for it.
Can any1 help me out?
|
|
06-13-2008
i was going to do an engine swap from a 3100 to a 3800 L32, and i needed to know what transmission runs with the L32, and what mods are out there for it.
Can any1 help me out?
06-13-2008
Just to clarify are you swaping a L36(Naturaly asparated Series 2) or an L32(supercharged series 3).....
Almost all mods for the L67 fit the L32, most common trans is the 4T65e-hd.... you will need to run a l67 or other non-L32 throttle due to the L32 being drive by wire(no throttle cable, throttle blade is computer controlled)
06-13-2008
Probably need to use the L67 (Series II) throttle body, fuel rail (Series III is return-less), wiring harness, and injectors.
A tuner would be a good idea too.
06-13-2008
i'm not sure of the engine code, but it's the 3100 SFI in a 1994 Grand Prix. Naturally aspirated, yes.
A 10-year difference between engine and chassis, so i want to make sure everything will squeeze in the engine bay and under the car for the transmission.Lemme know if want to know more or need to know more.
06-13-2008
Fitment would be fine, but you'd need to run Series II electronics to even get it close to working.
06-13-2008
so Series II harness, and pretty much all the electronic components would be needed. Check. anything else in general i might want to prepare for? this would be my first swap and i'm anxious to get my engine. ^^ lol
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
