got a very low miles 3800 but its been sitting in a garage for 2 years. what do i need to do to safely start it up? how do i prime this motor?
|
|
02-01-2011
got a very low miles 3800 but its been sitting in a garage for 2 years. what do i need to do to safely start it up? how do i prime this motor?
02-01-2011
Has the motor been sealed the whole time? I would put fresh oil in it, crank it by hand with no plugs in it probably 20-30 times to circulate a little oil, put new plugs in and fire it up.
02-01-2011
are you putting it in a car?
02-01-2011
Nope. Spaceship.Originally Posted by 4THGENCAMAROFAN
02-01-2011
lol
02-01-2011
no the engine was pulled from a wreck and just left in a garage....the intake was pulled 6 months ago and the engine was covered with a tarp. it was only yesterday that i learned the wrecked car had only 30000 miles. figured it would be cheaper to cam and run this motor than rebuild mine as long as i can get it running without fear of it blowing from the door. i am gonna pull the heads to port them so what do u think i need to be looking for and what do i do if i find whatever it is u tell me to check?
02-01-2011
I need a motor gaaaaiiizzz. Thats why i was asking.
lol
02-02-2011
no...im gonna put it in my car if i can get her working i knew you couldnt prime these oil pumps with a drill so i needed to know how to get them running safely...u gotta admit though the question was retarded..lol
02-02-2011
more like a question of interest.
02-02-2011
If you're pullin the heads just pull the oil pan while you're at it and make sure you clean everything up. Slap it back together, put it in the car and drive it like you stole it.
02-02-2011
do you suggest any kind of chemical cleaner to run through it or just dump some oil down it and flush it out with oil? and i did steal it
02-02-2011
seafoam cleans schtuff really good. My camaro smoked like it was going out of style when i ran it through the brake booster line into thet intake and it took out all the carbon.
02-04-2011
u can put seafoam in the motor...that doesnt tear the bearings up?
02-04-2011
yeah, you hear of lots of guys doing it actually, generally with good results
02-04-2011
you can...just dont leave it in too long or it will break down the oil and kaboom
basically run it for like 50-100 miles with it..check your oil periodically too to make sure its not breaking down and getting watery
Not sure if seafoam recommends it or not but lots of people have had good results..im doing it next oil change which is in a couple weeks.
02-04-2011
may give it a shot i thank you guys but we misplaced the botton lol
02-04-2011
can i get another like with that? jk lol
02-04-2011
if there were more id start a warehouse and hord them sorry lol
02-04-2011
I have use brake cleaner in the past. Just make sure you blow it out with compressed air and then fill it up with oil once it's back together and crank it for a second before you run it.
02-04-2011
oh i plan on blowing up my battery cranking it before i hook up the ignition
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
