Am getting error code P1441 canister purge problem
Anyone have same problem & definate fix?
Thanx, Jollimonn2![]()
|
Am getting error code P1441 canister purge problem
Anyone have same problem & definate fix?
Thanx, Jollimonn2![]()
Last edited by matt5112; 12-16-2010 at 03:02 PM.
Be sure to post in the correct section and label your thread so that people know whats inside it.
As per here: http://www.grandprixforums.net/dtc.php
stuck purge valve prolly.DTC P1441 Evaporative Emission (EVAP) System Flow During Non-Purge
try a new one. they're pretty cheap.
As per this which is also in the "how to" section up top: http://www.grandprixforums.net/websi...00-L36-L67.pdf
So yeah, go buy one already lol.This diagnostic will detect a purge solenoid stuck open.
I just fixed this same problem
One of the plastic vacuumm lines was cracked and sucking air.
There is a tee under the fuse box under the hood.(pass fender)
One line goes to climate control inside car.(controls air flow direction)
One goes to a canister behind the driver side headlight,
one goes to manifold.
Takes a few days of driving to clear the code on its own
good luck
Thank You for your info. Will check hoses.![]()
« Previous Thread | Next Thread » |
Tags for this Thread |