|
|
10-26-2010
well i decided to put a cold cai on my gtp sunday, and untill i did that i was unaware that the pcm was in the stock air box.... well today its rainin like crazy and i'm alittle worried to drive it. so if the pcm gets wet is it gonna hurt it ? or im worried for nothin? it does sound awsome with the new intake...
10-26-2010
Your worried for nothing...
My PCM is just sitting there, some zip tie it down.. i didnt.. havent had a problem.
Close Thread
10-26-2010
unless you decided to slide the computer down so it is dangling from it wires or laid it on the exhaust manifold your good. I just zip tied mine down on a metal plate that was right below the stock intake. no problems here. I've heard of other people doing that for a few years with no issues.
10-26-2010
well i used the foam padding from the stock box to sort of cusion it and zip tied it to the coolant botttle, so its not gonna go anywhere was just kinda worried bout water getting on it... thanks for the replies, i feel much better now!
10-26-2010
unless you go driving underwater there isn't going to be water getting to it, but if you're really worried about it throw a plastic bag around it.
Originally Posted by KeithGTP03
10-26-2010
I made a sleeve for mine out of plexi and used the foam to sandwich it in. I was bored.
As mentioned, if its not moving around or gettin hot you'll be fine.
10-26-2010
Its water proofed...
10-26-2010
I wouldnt do that, The pcms get rater hot. Better to leave it ventalated. Mines been just laying there for 5 years with no issue. It doesnt ever get wet, even in 4 foot of snow lol. Hell I even spilled a chit load of coolent on it once when my T fill leaked for the I/C. I swear the car ran better after that lol!
http://www.streetfire.net/video/2001...ynp_208097.htm
10-27-2010
the water cooled pcm mod ftw!
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
