|
|
10-15-2010
i got some supplies for my intake ..do i need 3"coupler or 4 ....and do i need a 45 angle pipe 4" or 3" i hear 2 differnt stories..plz help i got a 4"coupler and a 3" pipe so what do i need to do ...take the cupler back and get a 3" or take the pipe back and get a 4" ...
10-15-2010
take the pipe back and go with the 4 in
10-15-2010
get a 3.5" inlet filter and put it on the throttle body.
10-15-2010
Where do you put the AIT sensor if the filter is slapped directly on the TB?Originally Posted by 01GTP
10-15-2010
Zip tie it somewhere close to the filter.
10-15-2010
yeah i was running the filter right of the throttle body...just had my sensor zip tied on top of the filter
10-15-2010
You hear about 3" pipes because those are geared for '04 and up cars. They have the air flow sensor separate from the throttle body. The housing for the sensor is 3" in diameter, so it's kinda pointless to do anything larger on that generation of GP.
10-15-2010
4in coupler, 4in pipe, 4in filter, drill hole for IAT... done.
10-15-2010
Do you know what size drill bit you used to make a snug fit?
I don't want to drill unless I know the exact size I need yah know
10-15-2010
get a rubber grommet to put the iat in...
Originally Posted by SuperSport
10-15-2010
i used a small one and kept enlarging the hole till the proper size so i was exact
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
