|
|
09-17-2010
can anyone tell me and or even show me pictures of how and where to install/mount the h.i.d headlight conversion kit in a 2006 grand prix? i cant figure it out....i have a feeling this might be a simple answer but if someone could help me out that be awesome! thanks!
~dan
Last edited by Bio248; 09-18-2010 at 12:49 PM.
09-18-2010
You can mount them wherever you want. You can use zip ties or two way tape, or whatever you want, just make sure it's secure.
Without a relay harness:
Disconnect stock bulbs form harness. There should be a plug going to the ballast that plugs into where the stock headlight bulbs used to plug in. After you plug that in, plug the HID Bulb into the ballast and voila...
As simple as that.
Stock headlight harness>ballast>HID Bulb
09-18-2010
When I installey ballasts I put them inside the fenders and tie rapped them down so they could move and they are semiprotected from rain and snow
09-19-2010
OK thanks guys! 1more thing the instructions I have say to disconnect the drls I can't seem to figure that part out I was told they wont work with them still active
09-19-2010
They will work with your DRL's active... but, they'll be receiving less power to the ballasts. This will eventually kill your ballasts.
What year is your Grand Prix?
09-20-2010
Its a 2006. I know it can be done I've seen people that have them installed on the same Gen as mine...
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
