This car that I bought has an alarm in it and the owner did not have any fobs. It's a project car and I had to trailer it home. At first it would not turn over and that problem was a shifter. By the time the battery had some charge it was dark and I quit messing with it. I did sneak out later and try and see if it would turn over and it did, but it would not bust off. This has been sitting for a long time and it may just be out of gas. Since I don't have the fobs, I guessing if I want something like that I just need to get a newer alarm, maybe even remote start. Also that would give me ability to remotely unlock the doors.

Anyway for now, I just want to remove it. Of course I can follow wires and re-splice them. I just want to make sure there is not something more complicated. My 02 remote start hooked into the tac, this has a wire wrapped around the plug wire, looks like it is sensing by induction. I have not traced the wire yet, maybe something else, but I doubt it. I included a picture of the switch and there is a little toggle switch also. Can anyone guess the brand? Where would the put the control module(s)?
(the picture is hard to see, did not notice till got ready to post, will do a better one if it would help) 20130618_053419_zps67d28768.jpg Photo by penright | Photobucket, 20130618_053432_zps1514eb3e.jpg Photo by penright | Photobucket