BolthittingrailnotlettingLogsseal.jpg picture by onequickfamilysedan - Photobucket
? I ran it for a week after installing the SSIC. I didnt notice the log was hitting the blower bolt and not letting the injector closest to the egr valve not fully seat. I only noticed when I pulled the Log off to reseal the FPR.
Im so lucky the car didnt go up in flames.....
This picture shows the injector not fully seated and crooked as im trying to force it in. Hard to tell in the pic but the greyish figure is the injector that's to the left a little off center.(pic taken at egr) POS LOGS HITTING BLOWER BOLT picture by onequickfamilysedan - Photobucket
Originally Posted by QwikGT
