hey, need a bit of help, my car ignitionswitch doesnt turn. some times it does wat could it be? you have to mess with it.![]()
|
change the key cylinder before your key stops working one day. then it'll be a pain to break it. all you got to do is take off the cover from the steering column. there is a little hole at the top right above the cylinder. turn key onto on position and insert a small allen wrench into it and you should feel a tab. pull cylinder out when you feel the tab pressed down. i think you may have to put car in reverse to disable starter so you can turn key all the way to crank so you can feel that tab.
I am not trying to hyjack the thread but I have a question that may be along these lines. I have a 2005 GT. The key is getting where it will not even go into the switch(cylinder). When I can get it in, it turns fine. Should I look into changing the cylinder? What about having a locksmith look at it? And...how much does replacing a ignition cylinder cost? Thanks.
Tony
thanks for the tips. im going to try that ignitionswitch fix,but its alot of shss to do. my gtp its a 98, started with the ac blower motor quiting problem. the ac stops blowing and i have to hit the lower passenger feetboard where the blower motor is. ive read that it could be the ac blower motor resistor.but now the ign switch started to bug
![]()
« Previous Thread | Next Thread » |
Tags for this Thread |