so you need to support the engine when you unhook the dogbones? my mounts are worn the engine has to much play in it for them to be goog
Printable View
so you need to support the engine when you unhook the dogbones? my mounts are worn the engine has to much play in it for them to be goog
I have the WBS mounts... they work great and there's very minor vibrations. I'd get them over the Intense units as they look 100% like the same part (they have the same exact raised edges/pattern) and the WBS mounts are $30 less.
I twisted the old ones out with the bolt/nuts and then soaped up the new ones and whacked them in with a rubber mallet. The entire job took about 15 minutes... and no you don't need to support the motor, it's supported from underneath.