Re: pulling engine forward...
1 Jack car up, 2 remove upper motor mounts to the radiator support, 3 let car back down it will roll backwards on the way down, 4 set the parking brake so it doesnt roll forward, 5 remove the D@MN plugs its a piece of cake!;) Owning 3 GPs will teach you a few little tricks. Oh dont forget the motor mounts when your done lol. "Disclaimer"
Re: pulling engine forward...
Just put a ratchet strap on it and pull it forward. 10x faster and easier.
Re: pulling engine forward...
Quote:
Originally Posted by
Rocket468
I just reach back there and do it.
im with this guy.
i usally put a towel or something on the fendor so i dont scratch it leaning over but yea.
Re: pulling engine forward...
Its not bad now that I took all the brackets off the back and have headers. There was not room stock for my arms. You guys must be skinny...lol.
Re: pulling engine forward...
its easy, no removing of mounts or anything, i just reach under all the hoses from the pasenger side with ratchet and socked and change them, hardest part is trying to pull the plug wire off of the one that has the o2 sensor in the way.
Re: pulling engine forward...
Quote:
Originally Posted by
01GTP
Its not bad now that I took all the brackets off the back and have headers. There was not room stock for my arms. You guys must be skinny...lol.
or you have some really huge arms :th_laugh-lol3:
but yea headers and i also removed and rearanged things back there so it is easier.
Quote:
Originally Posted by
shawn3091
its easy, no removing of mounts or anything, i just reach under all the hoses from the pasenger side with ratchet and socked and change them
pretty much.