Help! Idea's for Heat Sheild??

[ActionJackson1985]

Hey guys so I have my FWI made up an installed, but the roof flashing I was planning on using, just wont work, due to that fact I am not willing to cut into my fender bracket. I am trying to fab up something for a heat shield. I've hit a road block an have run out of ideas? Anyone have any ideas?

P.S. Here are some pics to give you a better idea what i'm up against.

[matt5112]

Why did you use pipe end pieces instead of an elbow and a straight piece?

[GAFF]

Is that an HID Ballast mounted up that high?

[matt5112]

Is that an HID Ballast mounted up that high?

Sure looks like it.

[GAFF]

HA.

Go get some sheet metal

[SuperChargedGTP]

so not much help?

[copgtp]

Well, if you go onto Jeg's or JCWhitney you can order some heat shielding and cut it to fit. It comes in sheets.

But to be 100% honest with you... that cone is no where near as deep into the fenderwell for it to be considered a true FWI. Get rid of all the end piping and make yourself a CAI box if thats what you want to do. Either that, or push that filter out further than that, or put a 45º so you can go further into the well. if you do put that heat shielding around it, gains will be minimal.

[Bio248]

leave it right there and run with it.

[97gtsc]

x2^^^

[Bio248]

FWI are for noobs that dont know that flow > intake temps. weak sauce.

[blueguy]

just bolt the damned filter to the TB and be done...I sure like it

[matt5112]

FWI are for noobs that dont know that flow > intake temps. weak sauce.

When you mentioned as long as you optimize flow, FWI= 3.8-3.4 and everything under, TB.

So if you plan on modding seriously, TB.

[gtpinsc]

and take that engine cover off

[ActionJackson1985]

I only plan to go to a 3.4 setup, which will take about until spring till all the money is together for the headers an tuning, an such.

[Bio248]

leave your intake right there. the bend you need to get to get into the fender will make you lose power.

[badbrad]

leave it like it is and move on to the next mod, then give me your hids and i'll give u my stock stuff. seriously the fwi is great, pay no attention to the "not technically a fwi...." junk. nice setup.