|
|
10-31-2009
so this i where i have a nice hole in my exhaust. monroe wants almost 700 bucks to replace the cat back HA. trying to find somewhere that will just fix that part. but theres other spots on the exhaust thats gettin pretty rusty. i found a place around here that sells stainless steel tubing, $13/ft for 2.5in. in not sure how much i would need for the cat back...but is this a good route to go? or should i just try to get it patched up? thanks
10-31-2009
Well, IMHO if you want to patch it, use a $5 “Muffler and Tail Pipe Repair Kit” and do it yourself.
Your picture looks like your on borrowed time, so I would make plans to get a new exhaust soon. I would personally look into a local shop; usually they can do it better and cheaper. But you always have to compare apples to apples. If Monroe is asking $700 out the door for a performance SS exhaust, that ain’t bad in my book. An SLP Performance Exhaust un-installed runs $550 for our cars, just for comparison. Good luck.
10-31-2009
they were just talking about the stock exhaustl. they asked me if i wanted to know the price for the performance one but i said no.
10-31-2009
you could probably find a used complete stock cat-back for $50
10-31-2009
I got a stock catback at my house...I can cut the whole "Y" section out if you want me to. Shoot me a PM. Let me know
11-01-2009
thanks for the offer blue. ill let u know in a few days. im going to check a few places around here on monday and see if they can do anything first.
11-01-2009
I used to have a full stock exhaust from the downpipe to the tips, but now all I have is the downpipe, cat, and res.
11-01-2009
im debating on just getting a ss catback. ill more than likely run into this problem again because of rust
11-01-2009
The SLP and BORLAs sound goodOriginally Posted by EmEaston24
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
