i have an 04 GTP Comp G, im getting a clacking/scraping noise from the bottom end. I used a stethescope to accurately pinpoint the location of the sound, and its audible about 2 inches in from the rear of the block (near the tranny) through the oil pan. The noise is fairly loud at idle, and increased with rpm, and is no longer audible after around 2500rpm.

i want to pull the oil pan to check and replace the rod bearings, but the passenger side motor mount covers 4 of the bolts.

Is there any way to remove the oil pan with the motor IN the car? Maybe by lifting the motor slightly out of the mount? I dont have access to necessary tools for removing the motor completely, nor the cash to pay someone to do it for me.

Thanks,
Jeff