Fwi water in pipe

[shanester]

Today I installed a fwi with pvc and k&n on my 05gtp, went for a drive, later i decided to go take it apart and see if there was water in it raining today and there was. Any ideas? Is this just condensation or am I sucking water?

Thanks

[TDCRacing]

I have never had any issues with any of the intakes I sell or have used. Tell us a little more about the placement and how you have things routed.

[shanester]

I have a coupler connected to the maf small pipe then 90 elbow, pipe through roof flashing then 7" cone

[blueguy]

Maybe it was a really big puddle? That is odd...never had that issue and mine was about a foot down in the fender for a long time.

[thecon23]

yeaaa i was driving around today in the rain, i didnt get any moisture in my intake and i have almost the same setup as you. i avoided large puddles and didnt go hard on my car.

[blowfishRus6]

mine did the same thing. i dont know about the older year models but mine does not seal up completly in the fenderwell. looking down from the engine bay into the fenderwell i can clearly see the tire.

your going to need to seal up the fenderwell to fix this issuie.