Hey everyone. I have the dubious task of trying to replace my blower motor resistor. Ive got everything pulled out except the resistor. Im held up by two bolts that hold the resistor in place. The good news is that holes they screw into are slotted, so I only have to loosen them to get the thing out. However, they are right up against the firewall/floorboard and I cant get a ratchet nut driver or anything in there to even loosen them.
Whats worse, I can only see one of the bolts, the other I cant even get an eye on. I got the easiest one out obviously and I can see the resistor and its definitely fried.
Can anyone tell me how to get those bolts out or loosened? I would greatly appreciate any help anyone can give. If you have done this before please post up what you did. I dont want to destroy the thing (the bolts and mounting points) to get it out but am open to ideas.