Thread: 1998 Grand Prix Daytona 500 door trim/weatherstrip question

Results 1 to 6 of 6
  1. #1 1998 Grand Prix Daytona 500 door trim/weatherstrip question 
    SE Level Member
    Join Date
    Sep 2018
    Location
    Richmond Virginia
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Hey guys,

    So, I just picked up an immaculate 1998 Daytona 500 Grand Prix Supercharged with 92k on the clock and I am going over it doing little things. The top of both doors on this car have a weatherstrip / rubber molding that runs the entire length of the top of the window frame and it has a little wing on it that makes contact with the painted portion of the window frame on the car when the doors are shut, acting I guess as a little air seal. It is not what keeps water out as the main door weather stripping is beneath this and attached to the car, not the door......but the little rubber wing on the top of my door molding strip is torn off for about the last 8 inches of the top of the door. (door hand end of the door where people would put their hands over the years to shut the door by the top frame). I am wondering what this piece was called as I would like to find new material and replace it. There are tons of "weather strips" out there and matching this up would be a lot easier if I knew what GM called it and knew were to buy it. If anyone knows, please let me know. Thanks!

    Chris
    Reply With Quote  
     

  2. #2 Re: 1998 Grand Prix Daytona 500 door trim/weatherstrip question 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    those are not exactly cheap. i forget what they are called, but to remove them. open the door pull the plastic cap and remove the screw, then pop the inside triangle trim and loosen the three mirror nuts, go back to the trim, lift the side where the screw was like 2 inches, then pull back on it.

    it locks in with some slide i clips. the mirror holds it tight tot he door, why you need to loosen it up.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  3. #3 Re: 1998 Grand Prix Daytona 500 door trim/weatherstrip question 
    SE Level Member
    Join Date
    Sep 2018
    Location
    Richmond Virginia
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Thanks for the information. My biggest concern is finding them, I am not really worried about the cost. I have done tons of trim on all my cars over the years so I can no doubt do it. I need to find what they are called and find the parts. I thought about going to the Chevrolet dealer and seeing if they have any diagrams or information in the computer.
    Reply With Quote  
     

  4. #4 Re: 1998 Grand Prix Daytona 500 door trim/weatherstrip question 
    GrandPrix Junkie
    Join Date
    Oct 2009
    Location
    St. Louis
    Posts
    4,724
    Thanks (Received)
    18
    Likes (Received)
    75
    Dislikes (Received)
    0
    Chats
    0
    Try gmpartsdirect.com, rockauto, etc. May turn up something.
    Reply With Quote  
     

  5. #5 Re: 1998 Grand Prix Daytona 500 door trim/weatherstrip question 
    SE Level Member
    Join Date
    Sep 2018
    Location
    Richmond Virginia
    Posts
    6
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    0
    Quote Originally Posted by FordMan77 View Post
    Try gmpartsdirect.com, rockauto, etc. May turn up something.
    Supposedly GMPARTSDIRECT.COM has it, it is called the reveal moulding and it is 90 bucks but then then charge 35 for shipping. What a rip off. I can find it, now that I know what it is, on ebay....but not for less than about 135.00 (for ONE door). I stopped by the local huge Chevy dealer here in town yesterday and they looked it up...they said they can still get it from Lansing Michigan but it is about 150/side from the dealer. Amazing what a piece of rubber can cost. I'm wondering if I can get creative and somehow fix mine.....or find a junk yard Grand Prix.
    Reply With Quote  
     

  6. #6 Re: 1998 Grand Prix Daytona 500 door trim/weatherstrip question 
    GrandPrix Junkie
    Join Date
    Oct 2009
    Location
    St. Louis
    Posts
    4,724
    Thanks (Received)
    18
    Likes (Received)
    75
    Dislikes (Received)
    0
    Chats
    0
    Good luck. Every GP I've seen in the yard has them in the same shape usually, but you may get lucky. Much as I hate to say it sometimes I just cut my losses and bite the bullet on things like this. It is a lot for a "piece of rubber", but it's something that is not made aftermarket last I checked. You could always just buy one door at a time. At least you only have 2 doors
    Reply With Quote  
     

Similar Threads

  1. 1998 Daytona Grand Prix
    By JDrach in forum For Sale - Vehicles
    Replies: 2
    Last Post: 03-20-2015, 06:16 PM
  2. 1998 Daytona 500 Grand Prix GTP 1 of 1500 - $6800
    By xpzeed in forum For Sale - Vehicles
    Replies: 2
    Last Post: 09-14-2014, 08:39 AM
  3. 1998 Grand Prix GTP Daytona 500 Pace Car
    By Akcalvinkid in forum Members Rides
    Replies: 32
    Last Post: 08-31-2013, 08:54 PM
  4. 1998 Grand Prix Daytona Pace Car
    By crazyrabbit in forum Introductions/Noob Questions
    Replies: 1
    Last Post: 11-20-2009, 06:44 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •