|
|
10-31-2017
Last week someone attempted to steal my 97 gtp. They cut and ripped the wires out of the ignition switch. Basically I am searching for a replacement switch but the replacement plug (search by vin at GM dealer) has a different number of wires than the one that's in the car (12 wires).
Anyone ever run into this before on a 97? I had another 97 gtp that I junked last spring and have the column with a different ignition switch (14 wires). The vin on that one later
10-31-2017
I know this is going to sound like a dumb question, but who tries to steal a 1997 Grand Prix?
I cannot remember if I yanked my steering column out of my 97 and put it in storage or not. If I make it out to my storage unit I can check and see if I have it and check the connectors and wires for ya.
Originally Posted by The Sunfire Guy
10-31-2017
That would be excellent sir. I have looked at all the of available options on rock auto and none match what I have. Based on the vehicle connector I would say that the plug end isn't modified. I should have a wiring diagram from a buddy at a dealership later today.
11-03-2017
You have a lot of pins there. Very strange.
11-03-2017
that fat plug under the dash needs to be taken apart, the ignition harness is one side, the multi switch is the other side. now you have 1/2 the pins.
heres a harness how to. https://sparkys-answers.com/2009/09/...-changing.html
11-03-2017
Duh. That makes more sense.
11-03-2017
ive changed both them harness's, so ive been in that plug a few times now. just takes a screw driver to pry and pop it free from that black middle part. you'll see its got a grove and or a slot so it only fits one way and on one side, no fuking it up.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
