Tips on fishing wire from door into cabin?

[suitercrew]

Hey guys I'm trying to run 14 gauge speaker wire from my coupes doors into the cabin and I was seeing if anyone had any good suggestions on How to go about doing that. I tried last night and it was pretty much impossible. I thought about cutting a wire on the stock harness and taping my new wire to it and using it to pull the wire through but if there was a better way id like to hear your thoughts. Thanks guys

Sent from my LG-H918 using Tapatalk

[nox]

Coat hanger. Either cut or unwind it to be an L or J shape.

Sent from my ASUS_Z00TD using Tapatalk

[Scottydoggs]

the rubber accordion part comes off the door and car.

[FordMan77]

I just used my steel fish tape that I use for work (gotta love telecom). I was able to fish it going from the cabin into the door. Just kinda worked it through the rubber accordion part by hand until it popped through into the door. Then just taped the wire to it and pull. Walah, instant new speaker wire. I will admit the drivers side was a b*tch but that's probably due to me running it behind the parking brake assembly where I wanted it.

[Bronco Boy]

I just did this..... used a clothes hanger, and removed the rubber accordion thingy from the door. I fed the wire from the door through to the cabin.