Thread: Door hinge

Results 1 to 13 of 13
  1. #1 Door hinge 
    SE Level Member Lawenforcer's Avatar
    Join Date
    Feb 2012
    Location
    Shelbyville, IL
    Posts
    83
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    4
    Hello All. I took my door off my 2000 2 door GT, cause the sagging. I bought the rebuild kit to rebuild it but come to find out the bigger long pin that holds it together is snapped. So I need to replace the pin. Can you buy just the pin that fit's it. I am unsure what size it is so I don't want to order the wrong one. I also hate to order used hinges cause they would still need rebuilt I'm sure. Please help. I need to get this door back on...
    2000 Grand Prix GTP
    Reply With Quote  
     

  2. #2 Re: Door hinge 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    http://www.grandprixforums.net/threa...-with-new-PINS thi sis all i know of for pins. if the long one on the door side broke i think you need that whole part bolted to the door.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  3. #3 Re: Door hinge 
    SE Level Member Lawenforcer's Avatar
    Join Date
    Feb 2012
    Location
    Shelbyville, IL
    Posts
    83
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    4
    I was trying to upload a picture to show the problem but I can never get the pics to upload on my phone...
    2000 Grand Prix GTP
    Reply With Quote  
     

  4. #4 Re: Door hinge 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    this part? its th only long shaft.


    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  5. #5 Re: Door hinge 
    SE Level Member Lawenforcer's Avatar
    Join Date
    Feb 2012
    Location
    Shelbyville, IL
    Posts
    83
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    4
    Yes...it's that one. Mine is completely broke in two...
    2000 Grand Prix GTP
    Reply With Quote  
     

  6. #6 Re: Door hinge 
    SE Level Member Lawenforcer's Avatar
    Join Date
    Feb 2012
    Location
    Shelbyville, IL
    Posts
    83
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    4
    This is the problem...

    2017-02-01 09.34.13.jpg
    2000 Grand Prix GTP
    Reply With Quote  
     

  7. #7 Re: Door hinge 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    id grab a used one from a junk yard.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  8. #8 Re: Door hinge 
    GT Level Member mguzzo's Avatar
    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    483
    Thanks (Received)
    8
    Likes (Received)
    27
    Dislikes (Received)
    0
    Chats
    25
    ^^ agree, put on a set of good condition hinges. I ended up replacing my hinges then shimming a little to get the swing and closing correct.
    --
    "Silver Bullet" 98 GTP Coupe: Stock, rust free, and broadsided.
    Old '98 GTP Coupe: VS Cam, 3.0, S2IC, 42.5#, TOGs, N*/LQ4, Corsa. it once ran a 13 flat
    Older '98 GTP Sedan: Pullied, rockered, SSIC, etc. Stock 14.33 @ 96.5 / PB: 13.89 @ 101
    Reply With Quote  
     

  9. #9 Re: Door hinge 
    SE Level Member Lawenforcer's Avatar
    Join Date
    Feb 2012
    Location
    Shelbyville, IL
    Posts
    83
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Chats
    4
    Okay. They wanted $80 there at the local junk yard so wasn't sure if I could buy just that pin...
    2000 Grand Prix GTP
    Reply With Quote  
     

  10. #10 Re: Door hinge 
    GrandPrix Junkie ItHurtz's Avatar
    Join Date
    Feb 2011
    Location
    Antioch, IL
    Posts
    3,521
    Thanks (Received)
    4
    Likes (Received)
    17
    Dislikes (Received)
    2
    Chats
    156024
    A welder could fix that in 30 seconds.
    2000 GTPT Sold-brandonhall10 built trans
    2009 Challenger SRT8
    http://www.grandprixforums.net/threa...uestion.....no
    Expert at being gay.
    Reply With Quote  
     

  11. #11 Re: Door hinge 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,995
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    Chats
    243824
    80 for 1/2 a hinge? f that crap.

    theres parts outs listed here. any 97-03 hinge will work.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  12. #12 Re: Door hinge 
    GrandPrix Junkie idrivejunk's Avatar
    Join Date
    Jan 2014
    Location
    AR
    Posts
    4,899
    Thanks (Received)
    4
    Likes (Received)
    32
    Dislikes (Received)
    1
    Chats
    0
    That doesn't sound like a "you pull it" junkyard price, but a salvage hinge with your new bushing kit in it would normally be the easiest solution. Now that the pin is broken, the spring might be missing. Putting the spring in can be tricky so yeah I'd opt for a salvage hinge if available. But the "door roller pin" (your search term), which I usually call the detent roller, is available seperately but its a GM part and its a common one if I'm researching correctly. Under $10. Shared part with S-10s. If I were you, I'd stick the door back on and use it without detents, carefully, until you can locate a part.
    All Grand Prix, all the time. 69 Model J, 99 GT & GTP coupes. All junk, haha.
    Reply With Quote  
     

  13. #13 Re: Door hinge 
    GT Level Member mguzzo's Avatar
    Join Date
    Dec 2007
    Location
    Buffalo NY
    Posts
    483
    Thanks (Received)
    8
    Likes (Received)
    27
    Dislikes (Received)
    0
    Chats
    25
    in a pinch you could swap with the passenger side. The hinges are the same left and right, just swapped top and bottom.
    --
    "Silver Bullet" 98 GTP Coupe: Stock, rust free, and broadsided.
    Old '98 GTP Coupe: VS Cam, 3.0, S2IC, 42.5#, TOGs, N*/LQ4, Corsa. it once ran a 13 flat
    Older '98 GTP Sedan: Pullied, rockered, SSIC, etc. Stock 14.33 @ 96.5 / PB: 13.89 @ 101
    Reply With Quote  
     

Similar Threads

  1. 4 door hinge repair?
    By Fahrenheit in forum General Tech Discussion
    Replies: 1
    Last Post: 04-19-2015, 06:52 AM
  2. Door hinge help
    By blortz in forum Visual/Body Modifications
    Replies: 3
    Last Post: 09-18-2014, 10:16 AM
  3. HELP HELP! 99 grand prix 2 door DOOR HINGE REPLACEMNT
    By blortz in forum General Tech Discussion
    Replies: 7
    Last Post: 05-31-2011, 08:52 PM
  4. door hinge roller wheel
    By dougf in forum 04+ Specifics
    Replies: 0
    Last Post: 02-24-2011, 09:42 PM
  5. door hinge / pins
    By hourang in forum General Tech Discussion
    Replies: 11
    Last Post: 12-11-2010, 12:27 PM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •