|
|
12-17-2016
02 gp series 2. The vacuum hose fitting that attaches to the uim on back side. There are 2 hoses attached to it. The part that the skinny hose attaches to broke off the adapter.
Auto zone doesnt know what to search. What is it called? it came with my uim kit from dorman. Can I fix this without going to the jy? It's bitter cold in michigan right now lol. What does the skinny hose run to?
12-17-2016
if you got a plastic intake that port comes off, can be swapped out with a junk yard one. no idea if it can be bought on its own. maybe a dealer if it comes to it, but its part of the intake set im sure.
12-17-2016
yeah i replaced my stock uim last year with a dorman one. it's the black plastic one. kit came with all the gaskets, and fittings, etc. i wonder if i saved parts off the old uim i'd have to look in my garage lol.
so is this most likely a jy part? can anything be cobbled together from vacuum fittings from auto zone?
12-17-2016
if you got the old one still take a look at it, it slides up and off iirc.
12-17-2016
found a pic
12-17-2016
yeah the part that broke is the one that's to the left of that PCV spring. the skinny inlet that the skinny vacuum hose plugs into broke off.
12-17-2016
i know i threw my old UIM away but I can't remember if I saved the old vacuum fitting or not. i know i threw the PCV plastic part away because it broke.
12-17-2016
if it broke off flush you could drive a wood screw in the hole to stop the vac leak. heater air flow might quit working, cause thats what that vac line does.
dont think glue will hold. it might last a little while.
12-18-2016
I just found mine from before I did my topswap it's a newer one from a dorman UIM.
Sent from my SM-G920V using Tapatalk
12-18-2016
Yeah that is it. I can't find my old one must've threw it away. Is there any specific name for it? Auto parts stores don't sell it? I dread going to jy in this weather lol. Was there last Tuesday.
Broke it off replacing my uim gasket for the 2nd time.
12-18-2016
I don't think you can buy it separate it comes with the UIM. Do you need UIM gaskets? I have 2 new ones.
Sent from my SM-G920V using Tapatalk
12-18-2016
I was implying I'd sell you this one if you didn't catch that? Lol I just went and dug through my parts pile for it.
Sent from my SM-G920V using Tapatalk
12-18-2016
Might check the HELP! section at you local parts stores. Pretty sure I've seen it there before. If not, then just grab the one Tonkin has. F the cold.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
