I don't know where the driver side axles part came from - **** if that's the case I been doing my lim gaskets wrong this whole time!
|
|
08-03-2015
I don't know where the driver side axles part came from - **** if that's the case I been doing my lim gaskets wrong this whole time!
08-03-2015
You post in a thread and it gets all jacked up... lolOriginally Posted by RickyBobby03
I don't know where the driver side axles part came from - **** if that's the case I been doing my lim gaskets wrong this whole time!
08-03-2015
Can I see the pictures? I've never seen the what everything under the timing cover looks like? I don't even know how to remove the timing cover lol.
08-03-2015
top left is the little port that can crack with a 97-98 alt bracket with cast elbow.
what the engine looks like cover off.
08-03-2015
Spend 8 bucks and get one of those plastic under bed storage totes. Slides tight under car and will catch every drop of coolant.
08-03-2015
Dang, that's not what I expected it to look like. I'm used to seeing distinctive covers on RWD cars (internet pics). I never would've guessed that for this car lol.
08-04-2015
Look at my build thread in the link in my sig
08-04-2015
Very impressed. Looks like that took you a long time, but good for you.
08-04-2015
So then the elbow goes through the timing cover, then into what?top left is the little port that can crack with a 97-98 alt bracket with cast elbow.
what the engine looks like cover off.
08-04-2015
the engine block. the upper elbow has coolant via the lim in it.
08-04-2015
Ok. I knew the upper hose ran into the LIM, but wasn't 100% certain where the lower one ran. Thanks.
08-04-2015
all this dumb bracket and elbows do its get coolant to the heater core. long way to go for a heater core lines...id like to smack the crap out of who ever said, hey look at this! lets go this route!! and then beat the tar out of all who said, yes lets do it that way.....
08-04-2015
True, I mean there's like 2 feet of tubing just in the engine bay for the heater hoses. But then again, I couldn't think of anywhere else to put it where it wouldn't mess up the placement of other things on the motor.
08-04-2015
people have tapped the holes and put an fittings in the holes. then ran the hoses right to the ports. the aussies got a better set up too of course.
08-04-2015
I think I remember seeing on RockAuto that there was like a DOHC engine for Mexico and like a turbo model for European cars. Is this true? Like what do those motors look like then? And did the Aussie's have a different motor too?
08-04-2015
go look up holden. they use the gm 3800 sc but its rwd, some really nice cars they make. we got a few members on here from down under.
08-04-2015
Go to Photobucket
User Name: BillBoost37
Password: Boosted
Make sure the B of Boosted is capitalized. Bring food and water before you enter. Enjoy... all the pictures you could ever want to see and feel free to post them and ask questions.
08-04-2015
I remember one Holden car that was their variant of the G8, but can't remember what's it called off the top of my head.
08-04-2015
theres more than just that car. its GM down under.
08-04-2015
Commodore, that's it.
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
