Thread: What did you do to your car today? Vol 2.0

Originally Posted by WarStryker13

might have inhaled some of that tire cleaner, lol

Quote of the day! LOL

LED fogs are done....









The left side "levelness" isn't as bad as I thought; maybe a degree or 2 out. Gotta admit, they are growing on me. At this point I will leave them on the car. Considering a spacer to push the factory mount forward an inch or two.

Not today (past Saturday) pulled engine and tranny from parts car : )

Nooo give to meee

What did you do just glue them to some stock fogs lol

Sent from my SM-S902L using Tapatalk

Originally Posted by WarStryker13

Made a template for front STB brackets... I don't like drilling holes when I don't have to, and maybe I can make a few extra and spread the love. Lol



I'm thinking 3/16th inch steel, with studs on the inside for the braces to just drop onto.

Lol. These came in today. Already installed.


Sent from my S208 using Tapatalk

wasted my time doing this damn fan swap. car hit 200 on the road moving, (thats normal) but then i parked and it quickly rose to 222 and climbing.

i did also get the tranny cooler mounted, still need to run the lines tho.

Originally Posted by Scottydoggs

wasted my time doing this damn fan swap. car hit 200 on the road moving, (thats normal) but then i parked and it quickly rose to 222 and climbing.

i did also get the tranny cooler mounted, still need to run the lines tho.

did we talk about this before? i swapped to a new rad and the temps went back to normal AND this is was after i fixed my wiring harness to the fans/ the high lead kept burning up and therefore i had no extra fan power

maybe your fans are just crapping out and are weak

Originally Posted by WarStryker13

Made a template for front STB brackets... I don't like drilling holes when I don't have to, and maybe I can make a few extra and spread the love. Lol



I'm thinking 3/16th inch steel, with studs on the inside for the braces to just drop onto.

i have these and they are made out of aluminum works perfect and cheap

i just replaced them with after market crap. and it ran hot, wasn't really hot with the old fans. so i get to put them back on tomorrow.

Originally Posted by CrazyGuy03

i have these and they are made out of aluminum works perfect and cheap

dimensions, my good sir!

Originally Posted by Russosaur

Nooo give to meee

Are you fast enough for these lights? LOL

What did you do just glue them to some stock fogs lol

Basically, yes.
http://chrisb.users.superford.org/Gr...og_Lights.html

Sht I forgot your from moose land

Sent from my SM-S902L using Tapatalk

Originally Posted by Russosaur

Sht I forgot your from moose land

Moose Land!

Originally Posted by Bronco Boy

Moose Land!

WOO!!! even though it's not the same, it's still moose land. lol

Originally Posted by Scottydoggs

i just replaced them with after market crap. and it ran hot, wasn't really hot with the old fans. so i get to put them back on tomorrow.

Its pretty much been proven time and again aftermarket fans don't cool near as well as stock. I've seen it across many platforms.

Originally Posted by stealthee

Its pretty much been proven time and again aftermarket fans don't cool near as well as stock. I've seen it across many platforms.

years back on my 03 gmc the clutch fan was failing for th e3 rd time and the warranty was up. so i took the clutch fan off and installed two 16 pro comp fans. truck ran a degree cooler and the a/c was never as cold.

these did not live up to that pair of fans at all lol.

Cleaned up the stock headlights. Before and after




Sent from my iPhone using Tapatalk

My question is why do it on the car when it takes one bolt to take them out?

Originally Posted by stealthee

My question is why do it on the car when it takes one bolt to take them out?

This...
Would of taken you more time to tape and clean the bumper up afterwards then it would of been just to pull the tab of


Sent from my iPhone using Tapatalk