I know it is that time of the year when these questions flood the forum. I am posting this question now because I have tried several things and I have searched but have not found an answer. I will first describe the issue that I am having and next I will list the things I have tried and tested. Any help would be appreciated
With my heat on 90 degrees, the fan set on high, the mode set to vents I can feel warmth on the driver side but it does not blow out of the vents. On the passenger side I feel air blowing from the vents but it is ice cold.
I have read several post and this one http://www.grandprixforums.net/threa...ighlight=Blend was extremely helpful.
What I have tried:
- Flushed the radiator
- new T-Stat 195 degree
- flushed heater core (both lines on the fire wall are hot )
- My cars operating temp under normal driving is at the 1/4 mark 160 .....|.....210.....|.....260 (Torque app has me @ 195.8 F)
- I have not tried the blend actuator because I have the CJ2 digital climate control and the actuators are a little more expensive.
I believe I have 2 issues at the same time.
1. probably being an actuator because of the cold air blowing in the cabin
2. The other being a vacuum issue because on the driver side I can feel warmth or heat but it is not blowing out. Also when selecting the different modes to change from vents to floor to defrost I don't hear it change.
Please let me know if there is any more information I can provide that would be helpful