Old Thread
|
Old Thread
Last edited by SpeedGrid; 11-28-2014 at 05:43 PM.
Stock cars knock even with the stock 3.8 pulley so why would you risk chipping a piston by throwing on a smaller pulley..
i ran my rockered header 3.4 setup on a stock tune for a while
yes, i wanna see if explode
Stock the tune runs rich enough to run a 3.4 setup and probably even more. On the 3.4 setup I had on stock tune i was at 10.8ish afr.
I'll be a guinea pig for it. Stock my car had essentially 0KR except at WOT shifts. Now with headers, colder plugs and soon a CAI, I will put a 3.6 on (after scanning). Don't plan on getting a tune either.
It'll be fine Matt
I have headers, cam, stock tune, 3.4" and I still see knock. I feel there's crap causing my knock though, like vacuum leak or something. Just can't seem to track down my problem >.<
« Previous Thread | Next Thread » |