Who's running a VS cam because im thinking about it

VS is a small cam 90s would be more than enough. If it was an XP or S1x then I would say sure go with the 105s.

Quote:

---

Originally Posted by Slick2500

VS is a small cam 90s would be more than enough. If it was an XP or S1x then I would say sure go with the 105s.

---

105s put less wear on stock chain so they are a better option then the 90s

Quote:

---

Originally Posted by REDCOMPG

The usually.

Headers, intake, 90lb springs, new stock timing chain/dampener. Left the 3.8 on for awhile and eventually threw a 3.6 on.. Oh and in still running a tune for a basic 3.6 set up tuned for a stock cam.. But the vs is rather small so it's fine.. I'll have it retuned for the vs specially soon enough

Edit: oh and my heads were milled a bit and slightly port and polished

---

Better tell him that than.

Ya thats probrobly a safe set up i just want an aggressive summer car thats not terrible on gas an kicks a whole lotta a**im thinkin of the vs or the NIC now just to run the NIC though from stock its goin to run me mire than $1300

Sent from my LG-MS770 using Tapatalk

Quote:

---

Originally Posted by Ginseng

Agree with 150s being overkill but go with 105s not 90s. New stock chain and tensioner and new valve seals modded retainers or even better titanium modded. You might not need it but 42.5 injectors would be wise. Also ide throw on some headers and an intake and a 3.25 or 3.4 with 104 al coppers.

---

That sounds like a pretty solid set up but is a stock chain good enough for the 105 springs

Yup


And yea your going to want some bigger injectors then the stock ones because changes are your going to max them out

Whats the limit on rpms with 105s

Sent from my LG-MS770 using Tapatalk