Yup. It was between these and the trapezoid shaped ones. I went with these
Sent from my iPhone using Tapatalk
|
|
02-02-2014
Yup. It was between these and the trapezoid shaped ones. I went with these
Sent from my iPhone using Tapatalk
BOOSTIN
02-02-2014
Nice. I gave $30 for the whole exhaust off the gp, just used the back half tho.
02-04-2014
I dont think it has a cam in it, because it would sound like the "rough idle" when you first started it. When you first start it it sounds normal to me.
Originally Posted by The Sunfire Guy
02-04-2014
My car sounds "normal" for the first 5-10 seconds of startup, then you can start to hear the cam.
02-04-2014
^This^ Most cars with a cam will sound smooth at first, then as the car settles in the cam becomes more pronounced.
After listening to the video it almost sounds like either a Nic cam or an XP hot cam. I'm not a 3800 cam expert but from others I've heard that's what it reminds me of.
02-04-2014
Yeah it's really annoying not knowing for sure if it is or not, I'm almost ready to pay a shop to tell me
Sent from my iPhone using Tapatalk
BOOSTIN
02-04-2014
You dont like the cam sound? What other mods are you putting to the engine? Any way a cam is gonna help regardless
Sent from my SAMSUNG-SGH-I747 using Tapatalk
02-04-2014
Like have an intercooler and ported blower with 42 lbs injectors smaller puller and am planning to get the PCM re flashed so I'm sure it would throw it off if there is a cam and that's not in the tune
Sent from my iPhone using Tapatalk
BOOSTIN
02-04-2014
Maybe the current tune will have the answers as it would have been set for a cam if it does have one in there.
02-04-2014
That's a good point
Sent from my iPhone using Tapatalk
BOOSTIN
02-04-2014
That sounds very close to my xp setup, but could be nic
02-04-2014
Yeah it's driving me nuts not knowing. Lol
Sent from my iPhone using Tapatalk
BOOSTIN
02-04-2014
It accelerates decently quick, I did put the zzp stainless headers and 3 inch downpipe on right when I bought the car though too
Sent from my iPhone using Tapatalk
BOOSTIN
02-04-2014
Who has a cam any cam and makes 20 inches of vacuum at idle in gear or park?
VS is a mild cam and I don't on the original L67 or the L26 block.
02-04-2014
I actually have a video of it right before I got the exhaust welded back on when it was just open headers and it sounds just like its camming. Let me find the video and post it real fast
Sent from my iPhone using Tapatalk
BOOSTIN
02-04-2014
Oh yeah also when I live scan all six cylinders for misfires it reads it's misfiring all over at idle and as soon as it goes under load all cylinders read 0 until idle again.
Sent from my iPhone using Tapatalk
BOOSTIN
02-04-2014
I have a cam, see my sig. I pull 19-20inhg at idle in park.
02-04-2014
Not familiar with your cam. I take it you don't get 20 but are above 19. Is that cold or warm and what rpm idle in park.
02-04-2014
Cold or warm hovers right around 19-20inches.
Idle's around 900rpm. In gear I'm more like 15-16inches since the idle drops down.
02-04-2014
this was open headers
BOOSTIN
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
