|
|
09-14-2013
Even when I clear the error it comes back. It's indicating a leak somewhere. I tried a new gas cap. That didn't work. It comes on within a minute of clearing the error. What should I look for next? A broken hose or something? Any one get this error before?
09-14-2013
Broken wire or bad pressure sensor. Doesn't have anything to do with a leak.
Code is set when the FTP sensor voltage is less than .1volts for more than 5seconds.
Gray/blk is 5volt reference. Pin 53 on pcm F on tank plug.
Dr green is fuel tank pressure signal pin 26 on pcm G on tank plug.
Blk is low reference. (ground) pin 8 on pcm H on tank plug
Tank plug can be accessed under the cover in the trunk. Check for continuity and less than 5ohms from a to b on each wire. I'd put money on the sensor. But checking the wiring isn't too bad.
Sent from my SPH-L710 using Tapatalk 2
Last edited by rperry435; 09-14-2013 at 05:22 PM.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
