Thread: Cometic MLS question

this might sound crazy, call cometic

ask the ppl who made it

2 threads huh.

Nope, deleted the other one.

Maybe because majority of us stick to Felpros. Call the manuf and find out.

http://shop.zzperformance.com/store/...&bw=600&bh=600

look at that they are pretty much the same, 2 min on google

^ there you go. Honestly that's wht they look like Idk exactly why they make them so small but it works out fine.

don't worry about the spray, just make sure the deck on your cylinder head is straight and not marked up.

a freshly shaved head will seal better then a 3 thou warp and some sealent

this is off the cometic web site

http://www.cometic.com/technical.aspx

Why does Cometic recommend MLS gaskets to be installed dry?

Cometic Multi-Layer Steel (MLS) head gaskets go on dry because they are coated with a sealant. Each MLS head gasket is coated with a .001" thick Viton rubber that is bonded to the outer stainless steel layers. Adding an additional sealer can hinder the performance of an MLS head gasket.

Originally Posted by NinetyEightGTP

Nice work.

Also thinking I should coat them in copper spray. That's what ZZP says.

zzp doesn't know what they are talkin about sometimes, don't allways believe what a vendor says

Left and right gaskets are different for proper water flow in the block. The difference is the diameter for coolant flow.

Intense and ZZP both use copper spray.

http://intense-racing.com/Merchant2/...FEATURED_ITEMS

I copper spray all HG's. IT's overkill on the Felpro's but hell.. I've yet to have one leak.