|
|
02-28-2012
I'll reiterate this again like it has been before... Take a 3" intake tube and filter.. The engine is only going to take in a certain amount on its own, but with a larger intake, the engine has a larger volume of air to pull from.
So compare a 4" intake to that 3"... In this situation, the engine has a larger volume of air to pull from with the 4" compared to the smaller volume of the 3".
02-28-2012
4" tubing and filter as large as can fit.
No bends preferably, if you must: lower angle results in more flow.
02-28-2012
Most people run a 22.5* bend off the TB...4" intake...9" filter...
02-28-2012
Everyone forgets to make shrouding for it
02-28-2012
It's still gonna get hot.
Not like it helps.
02-28-2012
Suck air from outsides, not insides.
02-28-2012
HAI effectively decreases boost so people don't blow engines so often.
02-28-2012
Flows more though. Iat is higher, more likely to detonate.
02-28-2012
Yeah, agree.
02-28-2012
whats a scangauge lol
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
