Thread: What did you do to your Car today?

Before:


After:


Drunkie i love you man but ive been wanting to do this for a while now...

Originally Posted by Fivefingerdeathpunch

ProTip - Have front of car jack up and swing the wheel to the side you are working on so the caliper is facing out, then stick a big screw driver in there and pry against the rotor and pad and BOOM the piston goes back into the caliper, no tools needed ever. Rear brakes are different though most of the time.

did this today^^^^ this is really only a good idea if you have new rotors to put on, they get torn up when doing this. but it does make it easy to compress the piston back in.

so today for money, lmao. i did front brakes and front hubs on a FORD explorer. working on this truck just makes me hate fords even more.

the caliper slider lives in the caliper bracket, and one was rusted solid, no wonder they squeaked....so i beat it free, cleaned it up best i could re greased it real good, installed it, told my friend to get a used bracket with 2 good sliders as this one is f'ed, that brake still squeaks when coming to a slow stop.

with any luck the howl is gone on the highway, if not its off to do the rear hubs.

also changed a map sensor on a 2000 sebring. another pos. but it runs again.

put gas in my car, 3.67 for 93.

Originally Posted by scottydoggs

did this today^^^^ this is really only a good idea if you have new rotors to put on, they get torn up when doing this. but it does make it easy to compress the piston back in.

I was going to say, I tried this once, and fubar'd my rotor something fierce. After that when I went to buy new rotors I bought the compression tool for like 10-15 bucks and never looked back. that little tool has paid for itself time and time again.

Originally Posted by TLSheff

I was going to say, I tried this once, and fubar'd my rotor something fierce. After that when I went to buy new rotors I bought the compression tool for like 10-15 bucks and never looked back. that little tool has paid for itself time and time again.

I think I wedged my screw driver between the caliper and the pad on the non piston side and moved the whole thing until the piston compressed.

I found some chrome badges from an SE at the junkyard a few weeks back. Modified them and put this on the grille the other day.

Drove it in a friggin downpour while screaming at the idiot drivers going 20 mph and stopping at green lights.

Originally Posted by scottydoggs

did this today^^^^ this is really only a good idea if you have new rotors to put on, they get torn up when doing this. but it does make it easy to compress the piston back in.

so today for money, lmao. i did front brakes and front hubs on a FORD explorer. working on this truck just makes me hate fords even more.

the caliper slider lives in the caliper bracket, and one was rusted solid, no wonder they squeaked....so i beat it free, cleaned it up best i could re greased it real good, installed it, told my friend to get a used bracket with 2 good sliders as this one is f'ed, that brake still squeaks when coming to a slow stop.

with any luck the howl is gone on the highway, if not its off to do the rear hubs

That's a common failure point on the exploders/mountaineers. Mom and dads was the same way. Napa had a loaded caliper with bracket cheaper than just a new bracket with sliders.

Got a inbuilt power moonroof installed in the GXP. Looks good, and the opening is bigger than factory installed moonroofs.

Sent from my HTC Flyer using Tapatalk

I just fixed a girls 00 taurus. She had someone replace her battery and they hooked it up backwards and it fried the mega fuse. I told her to call me next time she needs something done instead of letting some random person "fix" her car.

Originally Posted by dsmuts

That's a common failure point on the exploders/mountaineers. Mom and dads was the same way. Napa had a loaded caliper with bracket cheaper than just a new bracket with sliders.

this one the rubber boot was missing on the slider that was sized up. im calling it a 10 dollar JY part at this point.

hes got a customer that gets him used parts real cheap and fast from lkq auto parts. he owns a dealership or some kinda car lot. so he gets the better price.

he got him a whole front clip for a sebring for $300, hood, bumper, bumper cover, fenders, headlights, rad support, new rad with fan, everything. even the plastic splash shields.

Finished Pic:

Also rotated the tires...

Pulled my tranny :thumbup:
"New" one goes in tomorrow morning

Originally Posted by scottydoggs

this one the rubber boot was missing on the slider that was sized up. im calling it a 10 dollar JY part at this point.

hes got a customer that gets him used parts real cheap and fast from lkq auto parts. he owns a dealership or some kinda car lot. so he gets the better price.

he got him a whole front clip for a sebring for $300, hood, bumper, bumper cover, fenders, headlights, rad support, new rad with fan, everything. even the plastic splash shields.

LKQ does good work...

Originally Posted by Mad Monkey

LKQ does good work...

i got this one so local to me, just over the GW bridge in the bronx, "hunts point" trust me you dont want to go there at night, junkys, hookers and muggers lol

even the cops are messed up over there at night.

Sent from my HTC Glacier

One more

Sent from my HTC Glacier

thats an interesting roof.. they just cut a hole and slap it in?

Well yea kinda... Its a ASC Signature series inbuilt roof. Had it done at this place that does dealership cars. After months of research I decided to go inbuilt because the spoiler style roof that comes from the factory doesn't open all the way, and its different.

Sent from my HTC Glacier