What did you do to your Car today?

Quote:

---

Originally Posted by hollas13

droped to a 3.4 pulley last night. i think i have some gaurdian angles tho cuz i scanned this morning and didnt get any kr

---

Bro u should just go straight to a 2.8

Mods?

Quote:

---

Originally Posted by hollas13

droped to a 3.4 pulley last night. i think i have some gaurdian angles tho cuz i scanned this morning and didnt get any kr

---

ported front and rear manifold, 104's, 3" dp, 180*, open cone. also always run 93 at the pump

scanning was done at wot all the way through 3rd gear. 16* advance at wot and bout 27*-30* cruising

Is that all it usually takes for a < '04 to run a 3.4?

Quote:

---

Originally Posted by hollas13

ported front and rear manifold, 104's, 3" dp, 180*, open cone. also always run 93 at the pump

---

ive heard people say you will probly still get kr from that. but i put a 3.4 on my 98 gtp last night having just thoes mods and scanned this morning and didnt see any kr.

Well last night i slaved in the garage all night shining the car and getting the alarm to function with out hicups, damn wire

Quote:

---

Originally Posted by hollas13

droped to a 3.4 pulley last night. i think i have some gaurdian angles tho cuz i scanned this morning and didnt get any kr

---

Scan again in the hottest part of the day good to get a good average of weather conditions and then determine if you have any kr or not.

Driving through my neighborhood. The car feels like it shifts a bit funny, or something & the check engine light flashes 3X then goes off. Hmm.

just did over lunch 96* outside no kr still

I think my car's being a pain today. Tranny temp was 199, a wee bit warmer than usual, and battery voltage is down to 12.72. I just installed a new battery. Not fixing anything. Not until it breaks.

Quote:

---

Originally Posted by SDGTP99

Driving through my neighborhood. The car feels like it shifts a bit funny, or something & the check engine light flashes 3X then goes off. Hmm.

---

A flashing SeS light means misfire

^^^I did change 2 spark plugs yesterday. So, that sounds about right. ;)

Quote:

---

Originally Posted by DirtDog

A flashing SeS light means misfire

---

Incorrect Junior.. it means "Possible Catalyst damaging condition"

which usually leads back to misfires or a clogged cat.

Changed my wheel color

Sent from my HTC One using Tapatalk 2

Quote:

---

Originally Posted by BillBoost37

Incorrect Junior.. it means "Possible Catalyst damaging condition"

---

Quote:

---

Originally Posted by Scottydoggs

which usually leads back to misfires or a clogged cat.

---

So I'm half right :/

Quote:

---

Originally Posted by BillBoost37

Incorrect Junior.. it means "Possible Catalyst damaging condition"

---

Quote:

---

Originally Posted by Scottydoggs

which usually leads back to misfires or a clogged cat.

---

thats what was happening with mine at one point.. and mine was a misfire... soo... dirt boy was right.. or maybe bill was right too....

Took the carpet out today, took 1 hour, pics to come later.

Quote:

---

Originally Posted by killerspeed101

I will.

---

calling you out son.........where's those pictures at!!