|
|
04-06-2017
I need parts to the pulley assembly like the bolts and the bolt caps that hold on the pulley. It seems the only way I can get these is by buying a replacement belt tensioner assembly. I have found the Dayco 89610 but it doesn't look a good fit although the parts may work and they are plastic pulleys.
I have spent hours searching for the right part. Literally hours. Can someone send me in the right direction please.
04-06-2017
For the metal pulleys, I'm pretty sure most of the ones I listed are metal.
http://www.grandprixforums.net/threa...ht=common+part
For the bolts, drive to a junk yard and pull off all the bolts you need. The likely laugh at the desk when you try to pay and ... free bolts.
Otherwise, if you tell me which bolts you need.... maybe I'll find my way to the parts cases I have left and if I have them... I'd toss them your way.
04-06-2017
The thread you posted didn't help. I have been to 3 junk yards in the area for past two months. Either the the whole deal is missing or more likely none of them are supercharged. I understand the Monte Carlo using the same engine.
04-06-2017
Reread your post...
Which "assembly" are you talking about?
In that thread that didn't help you, there's a great picture. Reference it and then we should be able to understand which parts/pieces you are looking for.
04-07-2017
In the thread there is a diagram on the engine with numbers. Number 3 is attached to an arm that bolts onto the engine. I am looking for that whole sub assembly. The parts I need are the bolts that secure the pulleys to that arm and there are "caps" that go between the head bolt and pulley and keep it even I guess. I'll post a pic later.
04-06-2017
If I posted something that didn't help, then we aren't on the same page.
Since you can't tell us which actual bolts you need, I'm unable to help you. Best of luck with your search, sorry I am unable to help you out.
04-06-2017
if there was a way to only know what pulley your talking about here. might be able to help. pick a pulley off the list in bills link.
04-07-2017
Is it listed here? http://www.rockauto.com/en/catalog/p...ensioner,11659
I'm getting lost at plural "bolts." If you just need bolts to hold it on, won't any auto parts store have M10 x (length) or whatever thread they are? I've used bolts from the hardware store on the Blazer.
04-07-2017
Here is a picture of it.
I have purchased some of the "caps" through ebay but they don't quite fit right against the pulley.
Last edited by NoNo; 04-07-2017 at 11:43 AM. Reason: Fix Picture
04-07-2017
so buy a new sc tensioner. it has a nut in the middle of its round body there, 13 mm 12 pt deep socket should fit inside, remove it and replace the tensioner.
04-07-2017
That would work. But I having difficulties locating one that is "specific for my vehicle". It''s a 2002 Pontiac Grand prix 3.8l sc. Not so easy to find. I've tried google, ebay, autozone, rockauto, napa, advanced, o'reillys, summit, and more.
Last edited by NoNo; 04-07-2017 at 10:28 AM. Reason: Clarify
04-07-2017
Essentially all I need is this
<img src="http://www.paulstravelpictures.com/GM-Pontiac-Grand-Prix-Idler-and-Tensioner-Pulley-Replacement-Guide/GM-3800-II-Idler-and-Tensioner-Pulley-Replacement-046.JPG">
04-07-2017
Pulley bolts? Try GM #12537035
Maybe not. I'll try and fix that image.
That guy, huh? Someone's gotta have a number for ya. Here's another view. Might have to order a new tensioner.
Last edited by SaukRapids; 04-07-2017 at 10:44 AM. Reason: Added image.
04-07-2017
Were getting closer. The shoulder on that washer is important as it fits snug on the pulley.
Last edited by NoNo; 04-07-2017 at 10:32 AM. Reason: Spelling
04-07-2017
I found one the pieces that I need. Its Delco 15-4974.
It comes with the bolt and the washer. I will check out what I have later to see if I have the assembly of the tensioner.
04-07-2017
if you buy the whole damn tensioner it comes with a new pulley and its bolt. they are all the same 97-03 maybe even 04 up is the same, whos looking up your parts? a moron at autozone?
if your missing the other idler pulley on the coil bracket that i seen missing but you said nothing about aka #8 on the list there, thats a dealer only bolt set up, or junk yard.
04-07-2017
I should wander out to the shed for s&g's ...snap a pic of one of these.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
