Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
It'll be fine if he leaves the blue he has now, but no more. Lol
It's actually looking really good so far, and the bumper swap will make it into a beautiful car.
Plus it's an almost complete conversion he's doing, which I really like seeing. It's one of the best examples of built, not bought.
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Fears of another what's his face (heavy something) I just couldn't take. Blue looms to much go back to bkack
Sent from my iPhone using Tapatalk
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Blue or red looms, it doesn't matter which, they all give RED nightmares. Lol :)
Re: plastikote paint?? *UPDATED* GOOD BYE SE HELLO CONVERSION!!! *PICS*
Quote:
Originally Posted by
willie14
Now i know what everyone is going to say that the drone is horrible and too loud but i fixed that. i added a seperate 9in extension pipe that i have clamped on right now(still need to weld up) and then a temp tip i had laying around. It literally killed almost all of the drone andisnt that loud on cold start nomore either.
http://i1378.photobucket.com/albums/...&1476958763229
I wish I could believe this. You should sell 9" pieces of exhaust pipe and some clamps as a "Drone Removal Kit". LOL
Quote:
Originally Posted by
REDCRAPGP
Please don't over do it with the blue
<whispering> Kind of late, isn't it? </whispering> :p
Re: plastikote paint?? *UPDATED* GOOD BYE SE HELLO CONVERSION!!! *PICS*
Quote:
Originally Posted by
Bronco Boy
I wish I could believe this. You should sell 9" pieces of exhaust pipe and some clamps as a "Drone Removal Kit". LOL
<whispering> Kind of late, isn't it? </whispering> :p
I'm dead serious. When I bought n installed muffler it was too loud, nice but loud. I didn't like how the muffler sat under the bumper so I bought cut n painted that extension piece and it killed like 90% of the drone. It worked so good imma buy the same muffler when I do the y pipe install. My guess is that since I'm giving the exhaust more paythways for exit it'll be even less drone. I was actually gonna do a DIY over it since it worked so good
Re: plastikote paint?? *UPDATED* GOOD BYE SE HELLO CONVERSION!!! *PICS*
This sounds like something similar to how humans discovered you can drink cow milk...
Nobody thought of it, until one guy decided to try it. Everyone called him crazy.
Now we have an entire industry dedicated to it. Lol
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
And some of the bigger pieces of loom is prob gonna get switched over to grey. The bigger 3/4 blue I got Is kinda cheap but the 1 in grey I still have is super thick n durable
Re: plastikote paint?? *UPDATED* GOOD BYE SE HELLO CONVERSION!!! *PICS*
Quote:
Originally Posted by
willie14
I'm dead serious. When I bought n installed muffler it was too loud, nice but loud. I didn't like how the muffler sat under the bumper so I bought cut n painted that extension piece and it killed like 90% of the drone. It worked so good imma buy the same muffler when I do the y pipe install. My guess is that since I'm giving the exhaust more paythways for exit it'll be even less drone. I was actually gonna do a DIY over it since it worked so good
Ok. LOL
Think what you want, but tips do not play a role in drone. Simple as that. I'm guessing that without the tips, you heard some resonance under the back of the car. Put on a tip so the exhaust exits from behind the car rather than under it, and the resonance is gone. You have a resonator, and it takes care of most of the drone we experience.
My ride, installed Borla mufflers and Magnaflow 10" tips, brutal drone.....
http://chrisb.users.superford.org/Gr...t_Tips_016.JPG
Same as above, but add stock resonator, no more drone.....
http://chrisb.users.superford.org/Gr...fflers_029.JPG
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Resonators are designed to reduce exhaust resonance. That's what they do.
But my milk discovery story was good, no? Lol
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Quote:
Originally Posted by
WarStryker13
But my milk discovery story was good, no? Lol
Yes. So good that if I was drinking milk, it would have sprayed out of my nose. LOL
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
I wasn't talking about the tip, I was talking about the extension I put on before it. Before cold starts were Lou as crap, cruising at 15-2k was loud, the 3hr trip I make to my property on the freeway was loud. I could barely hear my musiclet alone talk on the phone with someone. Now its just deep toned, can barely hear it while I'm just cruising. My girlfriend hated the crap out of it and my kids were scared of it. Now I don't hear any complaining. It sounds pretty good unless I high rev it, you all know that sound
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
It was loud because it was exiting under the car.
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
I've still got the stock res on their tho but from the look of it when I installed the DP, she's not looking too healthy
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Quote:
Originally Posted by
stealthee
It was loud because it was exiting under the car.
That's what I was thinkin too since before it was wayy behind the bumper
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Quote:
Originally Posted by
Bronco Boy
Yes. So good that if I was drinking milk, it would have sprayed out of my nose. LOL
Mmmm.... Just think of what situation the guy had to have been in to even think of trying it. Lol
And the extension on the end of the muffler is there stock, and I know stock mufflers will drone without a resonator. Maybe it's just personal preference/opinion, but I'm using a resonator every time.
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Anyone on here top swapped to gen5? Is it too much with higher comp or is it better with the more efficient blower?
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Quote:
Originally Posted by
willie14
I wasn't talking about the tip, I was talking about the extension I put on before it.
Yes, you made the tip longer. See the stock tip.....
http://chrisb.users.superford.org/Fo...t_Tips_026.JPG
Quote:
Originally Posted by
stealthee
It was loud because it was exiting under the car.
^ This.
Quote:
Originally Posted by
WarStryker13
Mmmm.... Just think of what situation the guy had to have been in to even think of trying it. Lol
Ewwwww. LOL
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Yea lmao....the tip I got on their now isn't stayin I just had I from a previous car so I used it for now
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Quote:
Originally Posted by
willie14
Anyone on here top swapped to gen5? Is it too much with higher comp or is it better with the more efficient blower?
Top swap needs supporting mods, there's not enough difference between gen 3 and gen 5 to need much more than a slightly bigger pulley. Maybe. Biggest thing would be headers and a tune, which you already have.
If course you'll need it tuned before you start it up with the blower installed, or just take the belt off the blower and baby it to E&J. Or buy a tuner.
Re: *UPDATED* GOOD BYE SE Build Thread *PICS*
Yea the tune im not worried about. Plus I'll have rockers & LS6 springs that are going into the new heads. What all would change in my top swap? I would need a different Lim l, tb adapt plate, gen 5 n what else changes? Reason I ask is they're are several gen 5 top ends on craigslist close to home going for nothing n I figured I I'm doin the sea why not go gen 5....
