SOLD!!!!
Located in: Bancroft, ON. CanadaI had said time and time again, i was going to finish these, but the novelty has worn off, I've lost interest in the GP, and there's no point in finishing them. I was building these to duplicate a set that a member sold on here previously.
I only have enough stuff for a front set. As that's all I was going to build at the time. You will also need front struts of your choice (AGX, or GR2), modified to fit the coilover sleeve on. And to have the top mounts finished (with the design I shall Provide) Bolt them all together, and install...
All parts are brand new Never Used, in original boxes.
**Not pictured below, is 2 sets (one for each side) of Roller thrust bearings, and Poly bushings (for the top mounts). They ARE included with this sale.
1) Eibach Helper Springs, 2.5'' Diameter, 3'' Long, 11lbs/inch
2)Strange Engineering Coilover Sleeve
3)Hypercoil Spring 10''Long, 2.5''ID, 375LB Spring Rate
4)Genesis Helperspring Guide
5)Modified Topmount, Needs cup machined/welded
And here is a photo showing how everything should work together.
