Morning all,
During this last bout with my GTP repairs and going through my box of car goodies I stumbled across a few good sets of vacuum harnesses I have been holding onto for god knows why...
So on the chopping block they go!
1st harness is I believe for Series II motors (97-03?) and is the vacuum line that runs from the SC bypass solenoid, to the the fuel pressure regulator, to the LIM, and around the back to the MAP sensor.
GM Part number is 24508742.
Also, part 25517507 is included (the rubber boot to connect to the bypass solenoid)
ALL rubber is in excellent condition and very pliable.
BOTH "T's" are in good shape.
$SOLD$ to 01GTPgirl!
2nd harness is I believe for Series II motors also (97-03?) and is the vacuum line that runs from the passenger side of the EVAP purge valve up to the throttle body.
GM Part number is 24506665.
Again, ALL the rubber is in good condition and very pliable.
The locking side is also in good shape.
$SOLD$ to 01GTPgirl!
Update 1/6/2015
The following is the vacuum line that runs from the A/C (through the wire loom I believe) to the top of the SC...
Originally picked for SgtMarshall, possibly in haste, as to seeing his talk in the chat box about his line being "melted" on the rear-most manifold.
I believe this is GM Part number is 10389218.
Rubber is in good pliable shape and has no cracks, although the rubber boot appears "formed" as from being on the vacuum nipple.
$8 shipped to the right home!
This harness is I believe for Series II motors also (97-03?) and is the vacuum line that runs from the passenger side of the EVAP purge valve up to the throttle body.
GM Part number is 24506665.
Rubber elbows are not in 100% pliable shape and are starting to become "tough" (TB side appears more weathered).
A few minor cracks/splits around the opening, although very usable.
In the pics, the manipulating of the boot (mainly the TB side when I squeeze it together) is as much as the rubber wants to "give"...I wouldn't squeeze it any further...
The locking side is also in good shape.
If for whatever reason this line becomes damaged upon/during install, I will give you a 100% refund.
$7 shipped to jwach!
This harness is I believe for Series II motors also (97-03?) and is the vacuum line that runs from the passenger side of the EVAP purge valve up to the throttle body.
GM Part number is 24506665.
Rubber elbows are not in 100% pliable shape and are starting to become "tough" (TB side appears more weathered).
A few minor cracks/splits around the opening, although very usable.
In the pics, the manipulating of the boot (mainly the TB side when I squeeze it together) is as much as the rubber wants to "give"...I wouldn't squeeze it any further...
The locking side is also in good shape.
This line is a little more weathered than the above one, so there is a price difference...
If for whatever reason this line becomes damaged upon/during install, I will give you a 100% refund.
$6 shipped to the right home!