Thread: BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced

Results 1 to 8 of 8
  1. #1 BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced 
    SE Level Member
    Join Date
    May 2013
    Location
    Ontario Canada
    Posts
    11
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hi everyone,

    I recently had the upper intake plenum replaced on my 2003 Pontiac Grand Prix GT (3800 non-supercharged). The following day it started making an intermittent squeal noise. I have been driving it this way for about a month and a half now.


    I thought it may be crankcase ventilation so at lunch time today I ran it until it squealed..just a few seconds after it started and then removed the oil fill cap. This took a ton of effort to do and it has more power than a new vacuum cleaner.

    I have already replaced the belt and tensioner pulley. The tensioner pulley was quite loose but the new one is nice snug bearing, spins freely, not the cause.


    Is it possible the upper intake plenum was installed incorrectly or is plugged somehow, or could this possibly be caused by the PCV valve? It started right after I got it back from the shop so..


    Thanks
    Reply With Quote  
     

  2. #2 Re: BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,030
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    I would first replace the PCV as its a under 10 dollar part, then if it continues take it back to the shop.

    SMGPFC Member #1
    Reply With Quote  
     

  3. #3 Re: BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced 
    SE Level Member
    Join Date
    May 2013
    Location
    Ontario Canada
    Posts
    11
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Fivefingerdeathpunch View Post
    I would first replace the PCV as its a under 10 dollar part, then if it continues take it back to the shop.
    Will do...this has been my DD for 4.5 years, great car. I have it up for sale but no bites yet, probably asking too much

    I'm thinking since I've done so much work to it I may just keep it for the winter. I pick up an '06 Dark Cherry GXP with only 60,000km tomorrow

    Will let you know how the PCV valve swap turns out.

    Thx
    Reply With Quote  
     

  4. #4 Re: BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced 
    SE Level Member
    Join Date
    May 2013
    Location
    Ontario Canada
    Posts
    11
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by rpenlington View Post
    Will do...this has been my DD for 4.5 years, great car. I have it up for sale but no bites yet, probably asking too much

    I'm thinking since I've done so much work to it I may just keep it for the winter. I pick up an '06 Dark Cherry GXP with only 60,000km tomorrow

    Will let you know how the PCV valve swap turns out.

    Thx
    Yup...no o ring on the pcv valve. Off to the dealer I go. Surprised a ring would cause that much of an issue with neg. pressure
    Reply With Quote  
     

  5. #5 Re: BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    Just get an oring at a auto parts store.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  6. #6 Re: BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced 
    I live here. 02NavyBlue's Avatar
    Join Date
    Dec 2012
    Location
    Where 4T65E's were born
    Posts
    5,067
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    That, or if you want you could get a kit with new hardware
    Buy Dorman - Help PCV Valve Kit 47033 at Advance Auto Parts
    2006 Grand Prix GT S/C 109k - Modded Transgo Shift Kit, Gutted Airbox, Dash Cam, and Inlays. Retros soon to come.
    2002 Grand Prix GT N/A 127k - Same as 06 Plus: Trans Cooler, DIY Aux Input, LED lighting, Suspension Upgrades, Tint, Retrofits.
    Sold.
    Reply With Quote  
     

  7. #7 Re: BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced 
    SE Level Member
    Join Date
    May 2013
    Location
    Ontario Canada
    Posts
    11
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey guys...none of the canadian stores seem to have the o ring lol...nothing like overpriced dealer rubber. Will let you know how that works.
    Reply With Quote  
     

  8. #8 Re: BAD Negative Crankcase Ventilation after Upper Intake Plenum Replaced 
    I live here. SlowNA06's Avatar
    Join Date
    Mar 2010
    Location
    Pennsylvania
    Posts
    5,928
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    In all likelihood, you'd need to buy the GM PCV kit, which is like $13 and includes every part you might possibly lose or break. Never hurts to have some spares, I guess. It's also available on rockauto.
    Irridium spark plugs last 100k mi and work just as well as copper. Copper is a waste on N/A and only lasts 15k mi. Don't use Platinum.
    Use 195* tstat unless you can thoroughly explain why not; 99.9% don't need a lower temp.
    Almost any oil filter, ever, is of higher quality than ACDelco. Spend $6+.
    Reply With Quote  
     

Similar Threads

  1. upper intake plenum
    By 94grandprix in forum 3.1L V6 (LHO/LG8)
    Replies: 1
    Last Post: 04-21-2011, 03:55 PM
  2. Upper Plenum
    By chev1988rolet in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 5
    Last Post: 08-20-2010, 08:16 AM
  3. crankcase ventilation valve?
    By jmanners in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 5
    Last Post: 12-10-2009, 08:54 PM
  4. Where can I buy Upper Intake Plenum?
    By dgiles79 in forum Shops and Community Heroes
    Replies: 2
    Last Post: 09-20-2009, 10:29 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •