Thread: Don't know what to do next... help??

Page 1 of 2 12 LastLast
Results 1 to 20 of 21
  1. #1 Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey guys, I bought a 98' Grand Prix GTP from a buddy that's leaving for the Marine Corps. Anyway, I bought the car for $700, knowing it would need a lot of tlc. I don't know all that much about cars. The car was exhibiting all the classic symptoms of a faulty CPS. So, I replaced it. No luck.. Turns out it was the ignition control module. I replaced that. After thinking everything was fine and dandy, I took the car up the Santiam Pass here in Oregon. The pass has some steep grades. About 80 miles through the pass (80% uphill), the car starts losing power so I give it more gas. Eventually, gas pedal is all the way down. Car loses power uphill again, more gas, cel starts blinking. Studdering.. I pull over smell smoke. Hop out, open hood, small flame under 2nd spark plus, front side. Coolant boiling out of overflow tank. Put fire out with water. Anyway, tried to flag people down, nobody stops. Whole time I'm driving, temp gauge didn't go above 210*. Eventually decide to drive home downhill mostly. Car fires up fine drives fine to rest stop. Check under hood, tube from radiator to engine has collapsed. Coolant level is low, have to put normal antifreeze in it, no dex coolant rest stop. Got rest of way home, car ran fine. Still running fine. Changed thermostat and I'm afraid to drive pass now. Any ideas? I noticed yellow sludge a long time back when he first bought it. It's gone now and hasn't come back.
    3.8 Supercharged 1998 Grand Prix GTP
    Reply With Quote  
     

  2. #2 Re: Don't know what to do next... help?? 
    GTX Level Member STEVEGTX's Avatar
    Join Date
    Oct 2012
    Location
    Sleepy Hollow, Illinois, United States
    Posts
    1,703
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Not to sure about the other things I know someone will come in and help but I know it is not good at all to mix the coolant you should get that out as fast as possible
    Reply With Quote  
     

  3. #3 Re: Don't know what to do next... help?? 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,833
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    Being Oregon.. are you using er...at least 91 octane? I think 91 is the best you can get there.

    Mileage on the car?
    Last tune up?

    I'm thinking potentially clogging cat.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  4. #4 Re: Don't know what to do next... help?? 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    I'd say closed cat
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  5. #5 Re: Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    170k miles.. and no I was using regular unleaded (87). And idk about last tune up possibly a few years back. I'm going to flush the radiator, but I live in an apartment and can't do work here and I don't even have access to a hose. That's interesting about the closed cat because I had a code for p0420 which if I remember correctly is the cat converter. Btw I had car in drive whole time(didn't move to 3rd). And the car is driving perfectly well in the city
    Reply With Quote  
     

  6. #6 Re: Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Code randomly went away and didn't come back btw
    Reply With Quote  
     

  7. #7 Re: Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hmm if it's the catalytic converter, can I just torch it out and throw in a piece of straight pipe? Any pros or cons to doing that.. By the way I know about emission laws and what not
    Reply With Quote  
     

  8. #8 Re: Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    A couple other things I've noticed are a rough idle and slight loss in power
    Reply With Quote  
     

  9. #9 Re: Don't know what to do next... help?? 
    I live here. Below Average Joe's Avatar
    Join Date
    Aug 2011
    Location
    'Merica
    Posts
    7,358
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    1
    Seems to me that like said above the cat is clogged, but you also need to use a minimum of 89 octane in the GTP. You probably need a tune up too. Check out here:

    http://www.grandprixforums.net/safel...0-a-67580.html
    Quote Originally Posted by Sven The Sexman View Post
    Bill had a major role in all of the Star Wars movies; he was the force.
    Reply With Quote  
     

  10. #10 Re: Don't know what to do next... help?? 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    Cut the cat out and deal with the code. Min 91 octane btw
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  11. #11 Re: Don't know what to do next... help?? 
    GTX Level Member STEVEGTX's Avatar
    Join Date
    Oct 2012
    Location
    Sleepy Hollow, Illinois, United States
    Posts
    1,703
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Isn't there a way to get the code to stop coming up?
    Reply With Quote  
     

  12. #12 Re: Don't know what to do next... help?? 
    I live here. Below Average Joe's Avatar
    Join Date
    Aug 2011
    Location
    'Merica
    Posts
    7,358
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    1
    Thanks smutty for the correction
    Quote Originally Posted by Sven The Sexman View Post
    Bill had a major role in all of the Star Wars movies; he was the force.
    Reply With Quote  
     

  13. #13 Re: Don't know what to do next... help?? 
    GrandPrix Junkie CTKGP09's Avatar
    Join Date
    May 2009
    Location
    Willoughby, Ohio
    Posts
    3,831
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    91+ octance gas, coolant flush, new plugs/wires, new/delete cat and you should like the car more
    '04 Chevy Silverado LT 4x4 - intake, headers, full exhaust, zo6 cam, 799 heads, tune, leveled, 33's
    '00 Grand Prix GTP DAYTONA 500 - L36 block, S1X, intercooled, GenV, N*, headers, full exhaust, coilovers, 5 speed swap, stage 3+ clutch
    Reply With Quote  
     

  14. #14 Re: Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Awesome guys, I will look into cutting that cat out and throwing in some straight pipe
    Reply With Quote  
     

  15. #15 Re: Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey guys, I'm back again. So with deleting the cat do I have to torch it out and throw in some straight bar? Is the cat bolted on or is it welded in? I'm trying to figure out how to do this myself and I don't have an oxy torch to cut it out or a welder. Is it possible to cut it out with a saw zawzall and clamp a tube in somehow? Or possibly cut out the cat and gut it and replace it with clamps? I know these might be "noobie" questions but I'm trying to use all the resources I have. I don't have much more money to go to the shop
    Reply With Quote  
     

  16. #16 Re: Don't know what to do next... help?? 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    you can buy a catless dp for cheap
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  17. #17 Re: Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    And by the way, the code I'm getting is p0420. Autozone printed it out for me and it's "catalyst efficiency low bank 1" does that further the suspicion that the cat is out? Or could it possibly be something else ?
    Reply With Quote  
     

  18. #18 Re: Don't know what to do next... help?? 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    That is usually the code you get when the cat is clogged up. I'm getting that code randomly.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  19. #19 Re: Don't know what to do next... help?? 
    SE Level Member tai27yiuop's Avatar
    Join Date
    Mar 2013
    Location
    Portland, OR
    Posts
    28
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Awesome..thanks. So can anyone direct me to where I can find one? I looked around a bit. I'm not looking for anything nice just the cheapest bolt in down pipe available.
    Reply With Quote  
     

  20. #20 Re: Don't know what to do next... help?? 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    Zzp had them cheap i thought
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

Page 1 of 2 12 LastLast
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •